Compare products

Non-reversible, The IT-9888 is a quality 1/4” drill with the teasing throttle control you need. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4” Composite Keyless chuck as IT-9888K, with 1/4” Metal Keyless chuck as IT-9888MK and with 1/4” Hi-Precision Geared chuck as IT-9888SPC.

IT-7788S2-A 3/8” Standard Jacobs Multicraft “S2” Drill Chuck. 3/8-24 threads. Key is model IT-7788S2-B. Chuck and key are model IT-7788S2-C. This chuck can be used on forward and reversible drills. Capacity 3/8”.

Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure.

Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees.

The IT-9888R is a quality 1/4” drill with the same teasing throttle control as above and a convenient reversing lever. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4”Composite Keyless chuck as IT-9888RK and with 1/4” Hi-Precision Geared chuck as IT-9888RSPC.

The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options.

The IT-7556VAC/IT-7555VAC have the same great specs as the IT-7556/IT-7555, but are set up to be attached to an industrial vacuum cleaner.

Same great tool as the IT-7718 but with a lower gear ratio. RPM is 2000, the perfect polishing speed. Comes complete with a rubber backup pad, our IT-7470A and the IT-7472 Wool Polishing Pad. A great tool for buffing and polishing paint, plastic, metal and wood.

Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only.

The perfect tools for cleaning and polishing dies, porting and polishing engines, de-burring castings and any job where carbide burrs or stones are used for delicate material removal. The IT-7401 now comes in a storage case with oil bottle, quick disconnect fitting, IT-5830 oiler and 2 collet wrenches.

The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options.

Compact to work in confined spaces. The IT-7757D cannot be damaged by overloading. Drill, brush, hone or deburr without hazard of electric shock. (Not for use with cast wheels or accessories not rated for 25,000 RPM.)

A great tool for heavy duty scaling, the IT-7601 has a well cushioned rubber handle, heat treated piston and barrel.

The IT-7553 is small, compact and easy to use. It features heavy-duty ball bearing construction, built-in regulator and a smooth powerful cutting action. The 3” velcro pad makes for easy attachment of sanding disks. The 3/32” Orbit gives a fine finish for the most demanding work.

This lightweight, rugged 1.0 horsepower sander is excellent for shaping and contouring patches, sanding body filler
and for heavy rust removal. Comes complete with a rubber backup pad – (our IT-7470A).

Tool comes standard with one head, either 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, M3, M4, M5, M6 or M8. Additional heads available separately.