Compare products

The IT-7838D comes complete with air supply hose and exhaust hose. Also provided is our IT-783851 2-1/2” offset blade. This tool is a must for every glass shop and may be used with a wide range of blades.

5/8”Drill Chuck with TAPERED MOUNT fits IT-9988HRS DRILL. Key is IT-9888HRS-B, Chuck and key is IT-9988HRS-C.

The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options.

The IT-7556/IT-7555 are built for comfort and deliver a fine finish. Features adjustable exhaust, heavy duty ball bearing construction, paddle lever, built-in regulator and rear exhaust.

7888P50V 3″ Velcro Pad 5/16-24

The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options.

Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees.

The perfect tools for cleaning and polishing dies, porting and polishing engines, de-burring castings and any job where carbide burrs or stones are used for delicate material removal. The IT-7401 now comes in a storage case with oil bottle, quick disconnect fitting, IT-5830 oiler and 2 collet wrenches.

7″ Velcro Poly Pad

Smooth, quiet and reliable, the IT-7786 & IT-7785 have a fast cutting action with the least amount of vibration possible. Exhaust is through the handle and blows toward the air hose, not on your work.

Our One Shot hammers are designed for operations requiring less power, including driving oil seals, bushings and pins. Every pull of the lever delivers a single blow that can be regulated by adjusting the air pressure.

*Regulator
*Full ball bearing construction *Built-in silencer
* 1/8” Orbit

Our best 2” DA Sander for getting in hard to reach spots where finish work is needed.

Our One Shot hammers are designed for operations requiring less power, including driving oil seals, bushings and pins. Every pull of the lever delivers a single blow that can be regulated by adjusting the air pressure.

The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks.

Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. Use an air blow gun to clean the head after extended use.

The IT-8758R and IT-8759R are the .35 HP version of the IT-8859R. With plenty of power and their smaller size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool.

Straight Handle Rivet Gun, .401 Shank Rivet Gun.

•Quality hardened gears
•Rear Exhaust
•Variable Speed
•Lightweight aluminum handle

Useful for drilling, grinding and wire brushing. The IT-7701D’s powerful motor and planetary gear system provide years of trouble free service.

5” DA Pad – 5/16-24
for the IT-7311W5, IT-7445 and IT-7785. PSA – Has vinyl face for pressure sensitive adhesive abrasives.

Smooth, quiet and reliable, the IT-7786 & IT-7785 have a fast cutting action with the least amount of vibration possible. Exhaust is through the handle and blows toward the air hose, not on your work.

The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options.

5” DA Pad for use with IT-7555VAC Spindle size- 5/16-24 Velcro face.

Small, lightweight and comfortable, the IT-7720N 3/8” Butterfly and the IT-9920 3/8” Butterfly Impacts are great for all types of assembly operations involving small fasteners. Excellent for transmission and body shops and all general mechanical work including production assembly. Both tools feature a 360 degree swivel regulator. Their compact size lets you reach the tightest areas.

Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. Use an air blow gun to clean the head after extended use.

*Teasing Throttle
*1/2 HP motor provides power through hardened planetary gear system
*Cutting head adjustable 360 degrees in 90 degree increments

7 1/2″ Wool Polishing Pad

Same great tool as the IT-7718 but with a lower gear ratio. RPM is 2000, the perfect polishing speed. Comes complete with a rubber backup pad, our IT-7470A and the IT-7472 Wool Polishing Pad. A great tool for buffing and polishing paint, plastic, metal and wood.

• Built-in regulator
• Long life twin hammer clutch
• Ring type socket retainer
• High performance motor
• Light weight aluminum handle
• Comfort grip
• Convenient forward and reverse

Sander Backup Pads for IT-7778.

Straight Handle Rivet Gun, .498 Shank Rivet Gun.

The IT-7815A features heavy duty alloy steel gears, safety lock off lever, lightweight aluminum housing, built-in regulator and convenient side handle. Rear exhaust.

6” DA Pad 5/16-24 for the IT-7311, IT-7446 and IT-7786. Has velcro face for abrasives with the hook and loop system.