Compare products

Same great tool as the IT-9916 but with a lower gear ratio. RPM is 2500, the perfect polishing speed. Comes complete with a plastic backup pad.

Built for production, the IT-7705 comes complete with round, flat, triangular and bastard files.
Order extra file set part IT-770501 (4 pcs.)

Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. Use an air blow gun to clean the head after extended use.

*Built in regulator
*Lightweight aluminum
*Lock off lever
*Rear exhaust
*IT-7002A44 Carbide Wheel included

The IT-9407S is a 2 HP sander that comes complete with a T-7470A 7” rubber pad and pad nut. This is the same great tool as the IT-9407 grinder, but without a guard. IT-9407S has a governor to prevent over speeding as well as a heavy duty lock off lever to help prevent accidental starts.

The IT-7553 is small, compact and easy to use. It features heavy-duty ball bearing construction, built-in regulator and a smooth powerful cutting action. The 3” velcro pad makes for easy attachment of sanding disks. The 3/32” Orbit gives a fine finish for the most demanding work.

7888P50V 3″ Velcro Pad 5/16-24

The IT-8857RE is a Heavy Duty Extended Die Grinder. Its length of 25 inches gets you into really tight spots and the .9 horsepower motor provides all the power you need. The collet provides maximum gripping strength because both ends of the collet are slotted.

The IT-7761 & IT-7761AH are reversible and produce accurate torque. The clutches are internally adjustable and feature rear exhaust.

*Regulator
*Full ball bearing construction *Built-in silencer
* 1/8” Orbit

Our best 2” DA Sander for getting in hard to reach spots where finish work is needed.

*Operates in any position
*Tool stops when nail is set
*Drives up to 60 penny nails
*Pressure activated

Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees.

Spare pads for the IT-7211 & IT-7511.

The IT-9707 & IT-9709 are super duty grinders designed for production grinding in foundries, shipyards, fabrication shops and any application that requires a powerful, lightweight grinder.

Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The IT-7151 has a longer stroke and heavier piston. The IT-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting.

A must for every glass shop. Our IT-7838B is a quality tool at an affordable price.

Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only.

The IT-7556/IT-7555 are built for comfort and deliver a fine finish. Features adjustable exhaust, heavy duty ball bearing construction, paddle lever, built-in regulator and rear exhaust.

The IT-7556VAC/IT-7555VAC have the same great specs as the IT-7556/IT-7555, but are set up to be attached to an industrial vacuum cleaner.

A must for every glass shop. Cuts incapsulated glass with ease. Also works great for cutting material out of expansion joints. Sharp blades and cutting action of this tool make for an excellent caulking and putty scraper – even cuts wood. Double head bearings for trouble free service.

• Built-in regulator
• Long life twin hammer clutch
• Ring type socket retainer
• High performance motor
• Light weight aluminum handle
• Comfort grip
• Convenient forward and reverse

A new addition based on the IT-8859R. Rolok pad makes easy and convenient abrasive changes.

These pistol grip screwdrivers are light and comfortable. Rear exhaust directs air away from the operator and muffles the exhaust noise. Location of reverse lever makes changing directions easy.

*.7 HP motor provides fast efficient grinding in tight spots
*Hardened spiral bevel gears in angle head for long life and low vibration
*Lock off lever standard
*Uses type 27 grinding wheels (not included)
*Built-in governor prevents overspeed

7” Poly Pads for the IT-7716, IT-7718, IT-8816/P type tools. 5/8-11 Female thread 5500 RPM Max.

The IT-5T Sand Rammer is a hard hitting Heavy Duty Rammer built for production use in foundries, construction sites, utility companies or wherever a Rammer is used.

Sander Backup Pads for IT-7778.

*Teasing Throttle
*1/2 HP motor provides power through hardened planetary gear system
*Cutting head adjustable 360 degrees in 90 degree increments

IT-8859RS50 Pad Adapter 1/4-20 x 5/16-24

5” DA Pad – 5/16-24
for the IT-7311W5, IT-7445 and IT-7785. PSA – Has vinyl face for pressure sensitive adhesive abrasives.

*1/2” Jacobs Chuck
*Requires only 5-1/2” Clearance
*One to one gear ratio
*Not for use with bits larger than 1/2”

A great tool for heavy duty scaling, the IT-7601 has a well cushioned rubber handle, heat treated piston and barrel.

* Built-in regulator
* Ball bearing construction
* Lightweight aluminum housing
* Exhausts through handle
* Rugged 1 HP motor

IT-5210 Beehive Spring for .401 Shank Hammers

Patented vibration and noise reduced saw cuts steel, aluminum, stainless steel, wood, plastic and fiberglass with ease. Comes with the IT-7922 hose swivel and safety lock off lever. Lightweight and powerful cutting ac- tion make this a must have tool. Will easily cut wooden 2 X 4’s. The beauty of this saw is the 3/4” stroke, which uses more of the teeth on each stroke. Adjustable blade guard. Comes with three blades.

Rugged and dependable