Compare products

The IT-9707 & IT-9709 are super duty grinders designed for production grinding in foundries, shipyards, fabrication shops and any application that requires a powerful, lightweight grinder.

•Quality hardened gears
•Rear Exhaust
•Variable Speed
•Lightweight aluminum handle

IT-7788S2-A 3/8” Standard Jacobs Multicraft “S2” Drill Chuck. 3/8-24 threads. Key is model IT-7788S2-B. Chuck and key are model IT-7788S2-C. This chuck can be used on forward and reversible drills. Capacity 3/8”.

The IT-7555B/IT-7556B have the same great specs as the IT-7555/IT-7556, but have a 3/32” orbit that can give a finer finish.

The IT-7556VAC/IT-7555VAC have the same great specs as the IT-7556/IT-7555, but are set up to be attached to an industrial vacuum cleaner.

The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options.

(uses our IT-9801341 4” Cutoff Wheel) same great tool as the IT-8801REX, but with short reach

•Quality hardened gears
•Rear Exhaust
•Variable Speed
•Forward and Reverse
•Angle head reaches into tight areas

5″ Velcro Poly Pad 5/8-11 for IT-8818P

Straight Handle Rivet Gun, .401 Shank Rivet Gun.

The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks.

•Quality hardened gears
•Rear Exhaust
•Variable Speed
•Lightweight aluminum handle

Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The IT-7151 has a longer stroke and heavier piston. The IT-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting.

IT-7788HR-KCN 1/2” Keyless Drill Chuck. Makes changing drill bits easy. This chuck can be used for for- ward and reversible drills. 3/8-24 threads. 1/2” capacity.

A great 1/2” production drill with HiTorque Double reduction gears.

The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip.

IT-6922R Regulated Hose Swivel 1/4″ NPT

The IT-9915 series of grinders are built for production and long life. Adjustable exhaust, Heavy duty safety lockoff lever. Use type 27 wheels (not included).

These pistol grip screwdrivers are light and comfortable. Rear exhaust directs air away from the operator and muffles the exhaust noise. Location of reverse lever makes changing directions easy.

IT-7788-KC 3/8″ Composite Keyless Drill Chuck. This chuck can be used on drills with forward and reverse. 3/8-24 thread Drill Chuck. Capacity 3/8”.

The perfect tools for cleaning and polishing dies, porting and polishing engines, de-burring castings and any job where carbide burrs or stones are used for delicate material removal. The IT-7401 now comes in a storage case with oil bottle, quick disconnect fitting, IT-5830 oiler and 2 collet wrenches.

Straight Handle Rivet Gun, .401 Shank Rivet Gun.

*1/2” Jacobs Chuck
*Requires only 5-1/2” Clearance
*One to one gear ratio
*Not for use with bits larger than 1/2”

•Heavy Duty 5/8” Drill
•Plenty of Power
•Side Handle
•Tapered Chuck
•Twin Hammer Clutch

The IT-9888R is a quality 1/4” drill with the same teasing throttle control as above and a convenient reversing lever. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4”Composite Keyless chuck as IT-9888RK and with 1/4” Hi-Precision Geared chuck as IT-9888RSPC.

This unique shredder has many uses. The roller on the back of the tool acts as a pivot point so that more or less pressure can be applied. Carbide wheel cuts fiberglass, concrete, wood, plastic and many other materials.

IT-6415V 5” Velcro Pad

The IT-7768HR and IT-7768HRK have convenient forward and reverse lever, rear exhaust and all ball bearing construction.

The IT-7788R and IT-7788K are great for those tough jobs that need extra power. Excellent tool for honing, reaming, wire brushing, hole sawing, and heavy duty drilling. Plus they are reversing.

Tool comes standard with one head, either 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, M3, M4, M5, M6 or M8. Additional heads available separately.

*.7 HP motor provides fast efficient grinding in tight spots
*Hardened spiral bevel gears in angle head for long life and low vibration
*Lock off lever standard
*Uses type 27 grinding wheels (not included)
*Built-in governor prevents overspeed

The IT-9870 & IT-9890 give added versatility with their 1/4” collets and threaded collets for 1/4-28 on the IT-9870 and 5/16-24 on the IT-9890. Quality one piece angle heads and unique lock off levers make these tools long lasting and comfortable to use.

Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees.

The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks.

*Teasing throttle
*Ball type socket retainer *Triple idler gear system *Light, easy to grip aluminum handle
*3/4 HP motor

This high torque ratchet handles those tough fasteners in tight places.

The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options.