Compare products

 
 
  Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x
777827
Placeholder
IT-7768R
IT-7415VV
IT-7761
IT-7616
IT-4XS
IT-9988HRS-A
IT-7121
IT-7767RNA350
IT-7700N
IT-7768R-SPA
777703
IT-7838
IT-7787RN
IT-8705R
IT-5710
IT-3010
IT-6415
IT-7020A
Title 777827 4-1/2" Sander Backup Pad IT-6120 Quick Change Spring for .498 Shank Hammers IT-8816 7" Angle Sander IT-881647 7" PSA Pad IT-7768R Super Duty 3/8" Reversible Drill IT-7415VV 5” DA Pad IT-7761 1/4" Straight Handle Screwdriver IT-7616 Air Scribe (carbide tip) IT-4XS Straight Handle Rivet Gun IT-9988HRS-A 5/8" Drill Chuck w/ taper IT-8707 7" Heavy Duty Angle Grinder IT-8759R 1/4" Rear Exhaust Angle Die Grinder IT-7815A 5" Angle Sander IT-7121 Super Duty .401 Air Hammer IT-8818P 7" Vertical Polisher IT-7767RNA350 Rivnut Tool IT-7700N Heavy Duty Metal Shear IT-9916P 7" Angle Polisher IT-7768R-SPA 3/8” Special Hi-Precision Drill Chuck IT-9556 6" Super Duty DA Sander 3/16" Orbit IT-7716DS 4500 RPM Drum Sander 777703 Replacement 8" pad for T-7777 IT-7838 Heavy Duty Sealant Cutter/Scraper IT-7787RN 3/8" Reversible 90 Degree Drill IT-8705R .5 HP Router IT-5710 Brass Multi Position Regulator 1/4” NPT IT-3010 Air Grease Gun IT-6415 5” PSA Pad IT-7020A 3/4" x 20-1/2" Belt Sander
Price $3.60 $4.00 $342.69 $17.83 $149.73 $20.71 $126.69 $139.94 $267.81 $81.19 $560.42 $89.83 $161.25 $113.44 $218.85 $510.31 $97.32 $280.48 $28.77 $205.03 $255.14 $16.56 $250.53 $134.18 $118.63 $10.08 $57.00 $8.29 $230.37
Add to cart
Description

Sander Backup Pads for IT-7778.

IT-6120 Quick Change Spring for .498 Shank Hammers

The IT-8816 is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with
a foam 7” Velcro Pad – (IT-881647V). Sanders come with blue grip and run at 5500 RPM. Polishers have a red grip and are 2500 RPM. The IT-8816 & IT-8816P have all the bells and whistles – Rear exhaust – lock off levers – cushion grips – foam pads – low noise – grease fitting in head.

7″ PSA Pad

Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only.

5” DA Pad for use with IT-7555VAC Spindle size- 5/16-24 Velcro face.

The IT-7761 & IT-7761AH are reversible and produce accurate torque. The clutches are internally adjustable and feature rear exhaust.

*Lightweight
*Marks on materials up to 64R in hardness
*Trouble free piston design
*Low air consumption
*Twist throttle

Straight Handle Rivet Gun, .401 Shank Rivet Gun.

5/8”Drill Chuck with TAPERED MOUNT fits IT-9988HRS DRILL. Key is IT-9888HRS-B, Chuck and key is IT-9988HRS-C.

The IT-8707 has a push button safety lock off lever, variable direction exhaust, built-in governor to maintain constant speed and a quiet and powerful 2 HP motor.

The IT-8758R and IT-8759R are the .35 HP version of the IT-8859R. With plenty of power and their smaller size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool.

The IT-7815A features heavy duty alloy steel gears, safety lock off lever, lightweight aluminum housing, built-in regulator and convenient side handle. Rear exhaust.

The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks.

RPM is 2500, the perfect polishing speed. Comes complete with a plastic backup pad, pad nut and wrench. A great tool for buffing and polishing paint, plastic, metal and wood. Can be used with brushes to clean automotive carpets.

Tool comes standard with one head, either 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, M3, M4, M5, M6 or M8. Additional heads available separately.

Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees.

Same great tool as the IT-9916 but with a lower gear ratio. RPM is 2500, the perfect polishing speed. Comes complete with a plastic backup pad.

IT-7768R-SPA 3/8” Special Hi-Precision Drill Chuck. 3/8-24 threads. Machined gear. Key is model IT-7768R- SPB. Chuck and key are model IT-7768R- SPC. This chuck can be used on forward and reversible drills. Capacity 3/8”.

The IT-9555 & IT-9556 sanders are our smoothest running DA Sanders. Metal rotors and fiberglass pads help to improve cutting action and durability.

These lightweight sander/polishers are excellant for producing a uniform surface finish without leaving shadows or transition lines. The perfect tools for cleaning welds, roughing, deburring, glazing, brushing, blending, graining, polishing and finishing.

Replacement 8″ pad for T-7777

A must for every glass shop. Cuts incapsulated glass with ease. Also works great for cutting material out of expansion joints. Sharp blades and cutting action of this tool make for an excellent caulking and putty scraper – even cuts wood. Double head bearings for trouble free service.

•Quality hardened gears
•Rear Exhaust
•Variable Speed
•Forward and Reverse
•Angle head reaches into tight areas

Both tools are lightweight, powerful production routers. Easily adjustable. Direct drive motors have no gears to wear. Complete with lock off levers and rear exhaust. All aluminum router base.

IT-5710 Brass Multi Position Regulator 1/4” NPT

The IT-3010 holds 14 ounces (approximately 400cc) of grease. May be loaded from a tube, from a bulk dispenser, by suction, or by filling it with a scoop.

IT-6415 5” PSA Pad

Lightweight Belt Sander is built for heavy use.

Sku - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Availability In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock
Weight .5 lbs .5 lbs 5 lbs .5 lbs 3.7 lbs .5 lbs 1.5 lbs 1 lbs 4.5 lbs .5 lbs 7 lbs 1.5 lbs 4.5 lbs 4 lbs 3 lbs 2.5 lbs 3.3 lbs 5 lbs .5 lbs 2.5 lbs 4 lbs .5 lbs 3 lbs 2.3 lbs 2 lbs .5 lbs 1.5 lbs .5 lbs 3.4 lbs
Dimensions N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Price $3.60 $4.00 $342.69 $17.83 $149.73 $20.71 $126.69 $139.94 $267.81 $81.19 $560.42 $89.83 $161.25 $113.44 $218.85 $510.31 $97.32 $280.48 $28.77 $205.03 $255.14 $16.56 $250.53 $134.18 $118.63 $10.08 $57.00 $8.29 $230.37