| Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
|
|
 |
|
 |
 |
 |
|
 |
 |
|
| Title | IT-6416 6” PSA Pad | IT-7749 Super Duty 1/2" Impact Wrench | IT-7888A1B w/ 1/4" Jacobs 1B Chuck | IT-7007N Spray Gun & No Drip Cup | IT-4120 Spring for IT-1X and IT-1XS | IT-78881B 1/4" Jacobs 1B Chuck | IT-7767RNA350 Rivnut Tool | IT-9888RSPC 1/4" Special Hi Precision Drill & Chuck | IT-7002A Low Speed Tire Buffer | IT-7788S2-A 3/8” Standard Jacobs Multicraft “S2” Drill Chuck | IT-8816 7" Angle Sander | IT-7788HR 1/2" Pistol Grip Reversible Drill | IT-7888KC 1/4" Composite Keyless Chuck | IT-9988HRS 5/8" HD Straight Reversible Drill | 777827 4-1/2" Sander Backup Pad | IT-7701SS Straight Handle Scissor Shear | IT-7888A w/ 1/4" Standard Chuck | IT-9901RN 1/4" Super Duty Die Grinder .9 HP | IT-9988HRS-A 5/8" Drill Chuck w/ taper | IT-8826 3/8" Ratchet Wrench/Screwdriver | IT-8859RS51 3" Rolok Pad 5/16-24 Female | IT-9800 M3-M12 Tapping Tool | IT-7121K Super Duty .401 Air Hammer Kit | IT-7601 Pistol Grip Needle Scaler | IT-7616 Air Scribe (carbide tip) | IT-7445 SL DA Sander w/ safety lever | 7715N67V 5" Velcro Pad for IT-7815A | IT-8857RE Extended 25" Die Grinder | IT-8005 One Shot Hammer | IT-7767RNA600 | IT-5540SPC 2 Speed Drill w/ 3/8" Precision Chuck | 8818P11 Adapter for T-8818P | IT-7838 Heavy Duty Sealant Cutter/Scraper | IT-7012 1/2" x 24" Belt Sander | IT-7416VV 6” DA Pad | IT-7701 Heavy Duty Metal Shear | IT-7787RN 3/8" Reversible 90 Degree Drill | IT-6416VV Velcro Vacuum Pad | IT-7718P 7" Vertical Polisher | IT-7788HR-KCN 1/2” Keyless Drill Chuck | 777703 Replacement 8" pad for T-7777 | IT-7415 5” DA Pad - 5/16-24 | IT-8818P 7" Vertical Polisher | IT-7768HRK 1/2" Reversible Drill w/ Keyless Chuck | IT-8863S 1/4" Straight Impacting Screwdriver | IT-7470A 7" Rubber Pad | 721128 2" PSA DA Pad 1/4-20 | IT-7788N 3/8" Pistol Grip Drill | 7888P50V 3" Velcro Pad 5/16-24 | IT-7888 w/ 1/4" Standard Chuck | IT-7111 Super Duty .401 Air Hammer | IT-9888-A 1/4" Special Precision Drill Chuck | IT-7472 7 1/2" Wool Polishing Pad | IT-7788K 3/8" Pistol Grip Reversible Drill | IT-5T Long Reach Sand Rammer | IT-7788R 3/8" Pistol Grip Reversible Drill | 751138V 2" Velcro DA Pad 6mm | IT-9988HRS34-A 3/4" Drill Chuck w/ taper | IT-7511 2" Angle DA Sander | IT-881647 7" PSA Pad | 777828 5" Sander Backup Pad | IT-7X Straight Handle Rivet Gun | IT-7788HRK 1/2" Pistol Grip Reversible Drill w/ Keyless Chuck | IT-7888AKC w/ 1/4" Composite Keyless Chuck | 777826 3" Sander Backup Pads | 7815A02 Replacement 5" Plastic Pad for IT-7815A |
| Price | $8.29 | $244.77 | $139.94 | $100.77 | $3.60 | $141.09 | $510.31 | $132.45 | $78.31 | $11.49 | $342.69 | $124.39 | $112.29 | $777.57 | $3.60 | $130.72 | $118.05 | $149.73 | $81.19 | $93.86 | $8.61 | $517.80 | $178.53 | $218.85 | $139.94 | $143.40 | $26.47 | $249.38 | $550.05 | $510.31 | $176.23 | $12.64 | $250.53 | $291.43 | $20.71 | $99.62 | $134.18 | $8.29 | $176.23 | $23.01 | $16.56 | $8.61 | $218.85 | $201.00 | $106.53 | $22.44 | $8.04 | $68.52 | $14.37 | $111.14 | $68.52 | $21.28 | $13.80 | $74.85 | $737.83 | $74.85 | $8.04 | $129.57 | $17.83 | $3.60 | $445.22 | $143.97 | $124.39 | $2.85 | ||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description |
IT-6416 6” PSA Pad |
The IT-7749 has a steel clutch cover for use in demanding applications. A strong tool with 500 ft.lbs torque in forward and 600 ft.lbs. in reverse. |
The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip. |
IT-4120 Spring for IT-1X and IT-1XS |
The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options. |
Tool comes standard with one head, either 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, M3, M4, M5, M6 or M8. Additional heads available separately. |
The IT-9888R is a quality 1/4” drill with the same teasing throttle control as above and a convenient reversing lever. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4”Composite Keyless chuck as IT-9888RK and with 1/4” Hi-Precision Geared chuck as IT-9888RSPC. |
*Built in regulator |
IT-7788S2-A 3/8” Standard Jacobs Multicraft “S2” Drill Chuck. 3/8-24 threads. Key is model IT-7788S2-B. Chuck and key are model IT-7788S2-C. This chuck can be used on forward and reversible drills. Capacity 3/8”. |
The IT-8816 is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with |
A great 1/2” production drill with HiTorque Double reduction gears. |
The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options. |
•Heavy Duty 5/8” Drill |
Sander Backup Pads for IT-7778. |
The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip. |
If you need torque in a die grinder, the IT-9901RN is for you. The .9 HP motor is strong and compact. Aluminum handle is comfortable and easy to grip. |
5/8”Drill Chuck with TAPERED MOUNT fits IT-9988HRS DRILL. Key is IT-9888HRS-B, Chuck and key is IT-9988HRS-C. |
The IT-8826 is a super stubby 3/8” Ratchet Wrench that fits in the palm of your hand. |
IT-8859RS51 3″ Rolok Pad 5/16-24 Female |
Tapping Capacity-Aluminum: M3-M12 |
The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks. |
A great tool for heavy duty scaling, the IT-7601 has a well cushioned rubber handle, heat treated piston and barrel. |
*Lightweight |
The IT-7445/IT-7446 have a smaller grip to better fit smaller hands. They both come with regulators and muffled exhaust. |
5″ Velcro Pad for IT-7815A and tools under 15,000 RPM. |
The IT-8857RE is a Heavy Duty Extended Die Grinder. Its length of 25 inches gets you into really tight spots and the .9 horsepower motor provides all the power you need. The collet provides maximum gripping strength because both ends of the collet are slotted. |
Our One Shot hammers are designed for operations requiring less power, including driving oil seals, bushings and pins. Every pull of the lever delivers a single blow that can be regulated by adjusting the air pressure. |
Tool comes standard with one head, either 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, M3, M4, M5, M6 or M8. Additional heads available separately. |
The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options. |
Adapter has male thread 5/8-11. |
A must for every glass shop. Cuts incapsulated glass with ease. Also works great for cutting material out of expansion joints. Sharp blades and cutting action of this tool make for an excellent caulking and putty scraper – even cuts wood. Double head bearings for trouble free service. |
Lightweight Belt Sander is built for heavy duty use. Exhaust muffler keeps dBA’s in the low 80’s. Long reach makes tough jobs accessible. |
6” DA Pad for use with IT-7556VAC Spindle size- 5/16-24 Velcro face. |
Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees. |
•Quality hardened gears |
IT-6416VV Velcro Vacuum Pad |
Same great tool as the IT-7718 but with a lower gear ratio. RPM is 2000, the perfect polishing speed. Comes complete with a rubber backup pad, our IT-7470A and the IT-7472 Wool Polishing Pad. A great tool for buffing and polishing paint, plastic, metal and wood. |
IT-7788HR-KCN 1/2” Keyless Drill Chuck. Makes changing drill bits easy. This chuck can be used for for- ward and reversible drills. 3/8-24 threads. 1/2” capacity. |
Replacement 8″ pad for T-7777 |
5” DA Pad – 5/16-24 |
RPM is 2500, the perfect polishing speed. Comes complete with a plastic backup pad, pad nut and wrench. A great tool for buffing and polishing paint, plastic, metal and wood. Can be used with brushes to clean automotive carpets. |
The IT-7768HR and IT-7768HRK have convenient forward and reverse lever, rear exhaust and all ball bearing construction. |
These pistol grip screwdrivers are light and comfortable. Rear Exhaust directs air away from the operator and muffles exhaust noise. Location of reverse lever makes changing directions easy. |
7″ Rubber Pad |
Spare pads for the IT-7211 & IT-7511. |
•Quality hardened gears |
7888P50V 3″ Velcro Pad 5/16-24 |
The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options. |
Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The IT-7151 has a longer stroke and heavier piston. The IT-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting. |
IT-9888-A 1/4” Special Precision Drill Chuck. Machined gear. 3/8-24 threads. Key is model IT-9888-B. Chuck and key are model IT-9888-C. This chuck can be used on forward and reversible drills. Capacity 0 to 1/4”. |
7 1/2″ Wool Polishing Pad |
The IT-7788R and IT-7788K are great for those tough jobs that need extra power. Excellent tool for honing, reaming, wire brushing, hole sawing, and heavy duty drilling. Plus they are reversing. |
The IT-5T Sand Rammer is a hard hitting Heavy Duty Rammer built for production use in foundries, construction sites, utility companies or wherever a Rammer is used. |
The IT-7788R and IT-7788K are great for those tough jobs that need extra power. Excellent tool for honing, reaming, wire brushing, hole sawing, and heavy duty drilling. Plus they are reversing. |
Spare pads for the IT-7211 & IT-7511. |
3/4” Drill Chuck with TAPERED MOUNT fits IT-9988HRS DRILL. Key is IT-9988HRS34-B, Chuck and key is IT-9988HRS34-C. |
A great finishing sander. Smooth and quiet, yet has a fast cutting action. *Rear Exhaust |
7″ PSA Pad |
Sander Backup Pads for IT-7778. |
Straight Handle Rivet Gun, .498 Shank Rivet Gun. |
A great 1/2” production drill with HiTorque Double reduction gears. |
The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip. |
Sander Backup Pads for IT-7778. |
Replacement 5″ pad for IT-7815A |
||
| Sku | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Availability | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock |
| Weight | .5 lbs | 6 lbs | 2.5 lbs | 1.5 lbs | .5 lbs | 2.5 lbs | 2.5 lbs | 1.7 lbs | 2 lbs | .5 lbs | 5 lbs | 3.7 lbs | 2.5 lbs | 10.5 lbs | .5 lbs | 3.3 lbs | 2.5 lbs | 2.5 lbs | .5 lbs | 1.3 lbs | .5 lbs | 4.5 lbs | 5 lbs | 6 lbs | 1 lbs | 2.4 lbs | .5 lbs | 1.5 lbs | 3 lbs | 2.5 lbs | 3 lbs | .5 lbs | 3 lbs | 2.3 lbs | .5 lbs | 3.3 lbs | 2.3 lbs | .5 lbs | 5.5 lbs | .5 lbs | .5 lbs | .5 lbs | 3 lbs | 3.7 lbs | 2.7 lbs | .5 lbs | .5 lbs | 2.3 lbs | .5 lbs | 2.5 lbs | 4 lbs | .5 lbs | .5 lbs | 2.3 lbs | 22 lbs | 2.3 lbs | .5 lbs | .5 lbs | 1.5 lbs | .5 lbs | .5 lbs | 5.5 lbs | 3.7 lbs | 2.5 lbs | .5 lbs | .5 lbs |
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Price | $8.29 | $244.77 | $139.94 | $100.77 | $3.60 | $141.09 | $510.31 | $132.45 | $78.31 | $11.49 | $342.69 | $124.39 | $112.29 | $777.57 | $3.60 | $130.72 | $118.05 | $149.73 | $81.19 | $93.86 | $8.61 | $517.80 | $178.53 | $218.85 | $139.94 | $143.40 | $26.47 | $249.38 | $550.05 | $510.31 | $176.23 | $12.64 | $250.53 | $291.43 | $20.71 | $99.62 | $134.18 | $8.29 | $176.23 | $23.01 | $16.56 | $8.61 | $218.85 | $201.00 | $106.53 | $22.44 | $8.04 | $68.52 | $14.37 | $111.14 | $68.52 | $21.28 | $13.80 | $74.85 | $737.83 | $74.85 | $8.04 | $129.57 | $17.83 | $3.60 | $445.22 | $143.97 | $124.39 | $2.85 |