Compare products

A must for every glass shop. Cuts incapsulated glass with ease. Also works great for cutting material out of expansion joints. Sharp blades and cutting action of this tool make for an excellent caulking and putty scraper – even cuts wood. Double head bearings for trouble free service.

Patented vibration and noise reduced saw cuts steel, aluminum, stainless steel, wood, plastic and fiberglass with ease. Comes with the IT-7922 hose swivel and safety lock off lever. Lightweight and powerful cutting ac- tion make this a must have tool. Will easily cut wooden 2 X 4’s. The beauty of this saw is the 3/4” stroke, which uses more of the teeth on each stroke. Adjustable blade guard. Comes with three blades.

7888P50V 3″ Velcro Pad 5/16-24

The IT-8758R and IT-8759R are the .35 HP version of the IT-8859R. With plenty of power and their smaller size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool.

The IT-7761 & IT-7761AH are reversible and produce accurate torque. The clutches are internally adjustable and feature rear exhaust.

IT-5210 Beehive Spring for .401 Shank Hammers

The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks.

The IT-7445/IT-7446 have a smaller grip to better fit smaller hands. They both come with regulators and muffled exhaust.

The IT-8816 is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with
a foam 7” Velcro Pad – (IT-881647V). Sanders come with blue grip and run at 5500 RPM. Polishers have a red grip and are 2500 RPM. The IT-8816 & IT-8816P have all the bells and whistles – Rear exhaust – lock off levers – cushion grips – foam pads – low noise – grease fitting in head.

Replacement 5″ pad for IT-7815A

IT-7768R41BA-A 3/8” Special Jacobs 41BA Drill Chuck. 3/8-24 threads. Key is model IT-7768R41BA-B. High quality machined gear. Chuck and key are model IT-7768R41BA-C. This chuck can be used on forward and reversible drills. Capacity 3/8”.

IT-7788-A 3/8” Standard Jacobs Multicraft Drill Chuck. 3/8-24 threads. Key is model IT-7788-B. Chuck and key are model IT-7788-C. This chuck can be used on forward and reversible drills. Capacity 3/8″

Straight Handle Rivet Gun, .401 Shank Rivet Gun.

The IT-9888R is a quality 1/4” drill with the same teasing throttle control as above and a convenient reversing lever. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4”Composite Keyless chuck as IT-9888RK and with 1/4” Hi-Precision Geared chuck as IT-9888RSPC.

Adapter has male thread 5/8-11.

The IT-7665 is small, compact and easy to use. It features heavy-duty ball bearing construction, built-in regulator and a smooth powerful cutting action. The vinyl face pad makes for easy attachment of PSA sandpaper. Pad size is 90 x 90 x 80mm. Triangular Pad allows use in corners and tight spots. The 1/8” Orbit gives a fine finish and heavy cutting action for the most demanding work. Can be used for sanding, polishing and scrubbing.

IT-8859RS51 3″ Rolok Pad 5/16-24 Female

Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. Use an air blow gun to clean the head after extended use.

Small, lightweight and comfortable, the IT-7720N 3/8” Butterfly and the IT-9920 3/8” Butterfly Impacts are great for all types of assembly operations involving small fasteners. Excellent for transmission and body shops and all general mechanical work including production assembly. Both tools feature a 360 degree swivel regulator. Their compact size lets you reach the tightest areas.

5” DA Pad – 5/16-24
for the IT-7311W5, IT-7445 and IT-7785. PSA – Has vinyl face for pressure sensitive adhesive abrasives.

The IT-8802A has variable speed, uses standard sawsall blades and has double pistons that produce plenty of power. Stroke length gives added blade life. Designed for heavy duty use in ship yards, factories, refineries for manufacturing and repair applications.

*Lightweight
*Marks on materials up to 64R in hardness
*Trouble free piston design
*Low air consumption
*Twist throttle

6” DA Pad 5/16-24 for the IT-7311, IT-7446 and IT-7786. Has velcro face for abrasives with the hook and loop system.

The IT-7749 has a steel clutch cover for use in demanding applications. A strong tool with 500 ft.lbs torque in forward and 600 ft.lbs. in reverse.

A must for every glass shop. Our IT-7838B is a quality tool at an affordable price.