Compare products

Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. Use an air blow gun to clean the head after extended use.

3/4” Drill Chuck with TAPERED MOUNT fits IT-9988HRS DRILL. Key is IT-9988HRS34-B, Chuck and key is IT-9988HRS34-C.

Spare pads for the IT-7211 & IT-7511.

Straight Handle Rivet Gun, .498 Shank Rivet Gun.

The IT-8859G is small enough to reach the tightest areas. Rear exhaust and quiet operation. Complete with 2” type 27 wheel, swivel guard, grease fitting and built in regulator.

Non-reversible, The IT-9888 is a quality 1/4” drill with the teasing throttle control you need. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4” Composite Keyless chuck as IT-9888K, with 1/4” Metal Keyless chuck as IT-9888MK and with 1/4” Hi-Precision Geared chuck as IT-9888SPC.

The IT-9915 series of grinders are built for production and long life. Adjustable exhaust, Heavy duty safety lockoff lever. Use type 27 wheels (not included).

The .7 HP motor makes quick work of removing fiberglass, wood, steel or aluminum. Unique governor allows more air when RPM’s drop.
*Auxilliary handle fits right and left side

*All ball bearing construction
*Lightweight aluminum housing
*Exhaust muffler through handle
*Gearless – direct drive.
*Governor controlled. Maintains RPM under load.

Sander Backup Pads for IT-7778.

•Heavy Duty 5/8” Drill
•Plenty of Power
•Side Handle
•Tapered Chuck
•Twin Hammer Clutch

These pistol grip screwdrivers are light and comfortable. Rear Exhaust directs air away from the operator and muffles exhaust noise. Location of reverse lever makes changing directions easy.

IT-6120 Quick Change Spring for .498 Shank Hammers

The IT-8857R, IT-8859R and IT-8869R are .45 HP cushioned grip die grinders. With plenty of power and their compact size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool.

The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options.

5” DA Pad – 5/16-24
for the IT-7311W5, IT-7445 and IT-7785. PSA – Has vinyl face for pressure sensitive adhesive abrasives.

The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options.

The IT-9707 & IT-9709 are super duty grinders designed for production grinding in foundries, shipyards, fabrication shops and any application that requires a powerful, lightweight grinder.

Spare pads for the IT-7211 & IT-7511.

Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only.

*Teasing throttle
*Ball type socket retainer *Triple idler gear system *Light, easy to grip aluminum handle
*3/4 HP motor

This high torque ratchet handles those tough fasteners in tight places.

The IT-7768HR and IT-7768HRK have convenient forward and reverse lever, rear exhaust and all ball bearing construction.

The IT-9555 & IT-9556 sanders are our smoothest running DA Sanders. Metal rotors and fiberglass pads help to improve cutting action and durability.

The IT-9913WS is a top of the line Air Polisher for Stone Fabricators. Designed for continuous production use with maximum performance in Stone Shops. A very durable tool when used in adverse conditions, just remember to oil the tool through the air inlet and run for a second or two to coat all internal parts after use. Centrally fed water distribution provides quality finishes.

Lightweight yet durable, the IT-8815 has a comfortable grip, safety lever and adjustable exhaust. This tool is powerful and has a
side handle for extra control. Uses type 27 grinding wheels (not included).

The IT-8814EX is a Heavy Duty grinder designed for production grinding in foundries, shipyards, fabrication shops and any application that requires a powerful lightweight grinder.

Smooth, quiet and reliable, the IT-7786 & IT-7785 have a fast cutting action with the least amount of vibration possible. Exhaust is through the handle and blows toward the air hose, not on your work.