Compare products

The IT-7665 is small, compact and easy to use. It features heavy-duty ball bearing construction, built-in regulator and a smooth powerful cutting action. The vinyl face pad makes for easy attachment of PSA sandpaper. Pad size is 90 x 90 x 80mm. Triangular Pad allows use in corners and tight spots. The 1/8” Orbit gives a fine finish and heavy cutting action for the most demanding work. Can be used for sanding, polishing and scrubbing.

The IT-8857R, IT-8859R and IT-8869R are .45 HP cushioned grip die grinders. With plenty of power and their compact size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool.

The IT-7712 comes with the IT-771249 Rubber Eraser Wheel and the IT-771257 Stripper Wheel for Paint and Rust removal.

The IT-8857R, IT-8859R and IT-8869R are .45 HP cushioned grip die grinders. With plenty of power and their compact size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool.

The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options.

IT-7788S2-A 3/8” Standard Jacobs Multicraft “S2” Drill Chuck. 3/8-24 threads. Key is model IT-7788S2-B. Chuck and key are model IT-7788S2-C. This chuck can be used on forward and reversible drills. Capacity 3/8”.

The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks.

5/8”Drill Chuck with TAPERED MOUNT fits IT-9988HRS DRILL. Key is IT-9888HRS-B, Chuck and key is IT-9988HRS-C.

Small, lightweight and comfortable, the IT-7720N 3/8” Butterfly and the IT-9920 3/8” Butterfly Impacts are great for all types of assembly operations involving small fasteners. Excellent for transmission and body shops and all general mechanical work including production assembly. Both tools feature a 360 degree swivel regulator. Their compact size lets you reach the tightest areas.

Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The IT-7151 has a longer stroke and heavier piston. The IT-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting.

Straight Handle Rivet Gun, .498 Shank Rivet Gun.

The IT-8814EX is a Heavy Duty grinder designed for production grinding in foundries, shipyards, fabrication shops and any application that requires a powerful lightweight grinder.

The IT-8816 is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with
a foam 7” Velcro Pad – (IT-881647V). Sanders come with blue grip and run at 5500 RPM. Polishers have a red grip and are 2500 RPM. The IT-8816 & IT-8816P have all the bells and whistles – Rear exhaust – lock off levers – cushion grips – foam pads – low noise – grease fitting in head.

The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip.

The IT-9407S is a 2 HP sander that comes complete with a T-7470A 7” rubber pad and pad nut. This is the same great tool as the IT-9407 grinder, but without a guard. IT-9407S has a governor to prevent over speeding as well as a heavy duty lock off lever to help prevent accidental starts.

Replacement 5″ pad for IT-7815A

The IT-8758R and IT-8759R are the .35 HP version of the IT-8859R. With plenty of power and their smaller size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool.

Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. Use an air blow gun to clean the head after extended use.

Straight Handle Rivet Gun, .498 Shank Rivet Gun.

Non-reversible, The IT-9888 is a quality 1/4” drill with the teasing throttle control you need. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4” Composite Keyless chuck as IT-9888K, with 1/4” Metal Keyless chuck as IT-9888MK and with 1/4” Hi-Precision Geared chuck as IT-9888SPC.

The IT-9555 & IT-9556 sanders are our smoothest running DA Sanders. Metal rotors and fiberglass pads help to improve cutting action and durability.

This unique shredder has many uses. The roller on the back of the tool acts as a pivot point so that more or less pressure can be applied. Carbide wheel cuts fiberglass, concrete, wood, plastic and many other materials.

5” DA Pad – 5/16-24 for the IT-7311W5, IT-7445 and IT-7785. Has velcro face for abrasives with the hook and loop system.

The IT-8826 is a super stubby 3/8” Ratchet Wrench that fits in the palm of your hand.
A 1/4” hex hole in the anvil will accept 1/4” Apex screwdriver bits. The convenience of this tool is hard to believe, reaching into places like no other.

*.7 HP motor provides fast efficient grinding in tight spots
*Hardened spiral bevel gears in angle head for long life and low vibration
*Lock off lever standard
*Uses type 27 grinding wheels (not included)
*Built-in governor prevents overspeed

IT-9888-KC 1/4” Composite Keyless Drill Chuck. This chuck can be used on forward and reversible drills. This unique chuck makes changing bits easy. 3/8-24 threads. Capacity 0 to 1/4”.

These pistol grip screwdrivers are light and comfortable. Rear exhaust directs air away from the operator and muffles the exhaust noise. Location of reverse lever makes changing directions easy.

The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options.

The IT-7445/IT-7446 have a smaller grip to better fit smaller hands. They both come with regulators and muffled exhaust.

The IT-7761 & IT-7761AH are reversible and produce accurate torque. The clutches are internally adjustable and feature rear exhaust.

Small and easy to use, the IT-7702 cuts straight and curved shapes. Cuts aluminum, mild steel, plastic and fiberglass with ease. Comes with two blades (24 & 32 TPI).

If you need torque in a die grinder, the IT-9901RN is for you. The .9 HP motor is strong and compact. Aluminum handle is comfortable and easy to grip.