Compare products

The IT-7712 comes with the IT-771249 Rubber Eraser Wheel and the IT-771257 Stripper Wheel for Paint and Rust removal.

The IT-7556/IT-7555 are built for comfort and deliver a fine finish. Features adjustable exhaust, heavy duty ball bearing construction, paddle lever, built-in regulator and rear exhaust.

The IT-9888R is a quality 1/4” drill with the same teasing throttle control as above and a convenient reversing lever. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4”Composite Keyless chuck as IT-9888RK and with 1/4” Hi-Precision Geared chuck as IT-9888RSPC.

Fast material removal is accomplished with a gear driven 50 square inch pad. Ideal for applications between grinding and finish sanding. Eliminates scratch patterns.

Straight Handle Rivet Gun, .401 Shank Rivet Gun.

*Built-in Regulator
*1/2 HP motor
*Full ball bearing construction
*Built-in silencer
*Balanced counter weight design
*Locking shaft for easy pad removal
*Available with Velcro pad (specify when ordering)
*3/8” Orbit

IT-77882BASPA 3/8” Special Jacobs 2BA Drill Chuck. 3/8-24 threads. Key is model IT-77882BASPB. High quality machined gear. Chuck and key are model IT-77887BASPC. This chuck can be used on forward and reversible drills. Capacity 3/8”.

The perfect tools for cleaning and polishing dies, porting and polishing engines, de-burring castings and any job where carbide burrs or stones are used for delicate material removal.

Manual torque adjustment – tighten or loosen internal spring

The IT-9555 & IT-9556 sanders are our smoothest running DA Sanders. Metal rotors and fiberglass pads help to improve cutting action and durability.

7″ PSA Pad

6” DA Pad – 5/16-24 for the IT-7311, IT-7446 and IT-7786. PSA – Has vinyl face for pressure sensitive adhesive abrasives.

Smooth, quiet and reliable, the IT-7786 & IT-7785 have a fast cutting action with the least amount of vibration possible. Exhaust is through the handle and blows toward the air hose, not on your work.

Non-reversible, The IT-9888 is a quality 1/4” drill with the teasing throttle control you need. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4” Composite Keyless chuck as IT-9888K, with 1/4” Metal Keyless chuck as IT-9888MK and with 1/4” Hi-Precision Geared chuck as IT-9888SPC.

The IT-8816 is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with
a foam 7” Velcro Pad – (IT-881647V). Sanders come with blue grip and run at 5500 RPM. Polishers have a red grip and are 2500 RPM. The IT-8816 & IT-8816P have all the bells and whistles – Rear exhaust – lock off levers – cushion grips – foam pads – low noise – grease fitting in head.

Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only.

These pistol grip screwdrivers are light and comfortable. Rear exhaust directs air away from the operator and muffles the exhaust noise. Location of reverse lever makes changing directions easy.

Compact, lightweight and hard hitting. The IT-8839 and IT-8839A have composite housings that are ideal for your toughest job. Twin hammer clutches have lots of power. Tool exausts through the bottom of the handle. Built-in regulator.

When plenty of reliable power is needed, the IT-7801 will provide it. Cuts sheet metal, fiberglass, muffler clamps and hangers. Grinds burrs and rough edges.

The IT-9555 & IT-9556 sanders are our smoothest running DA Sanders. Metal rotors and fiberglass pads help to improve cutting action and durability.

A great 1/2” production drill with HiTorque Double reduction gears.

IT-7788HR-KCN 1/2” Keyless Drill Chuck. Makes changing drill bits easy. This chuck can be used for for- ward and reversible drills. 3/8-24 threads. 1/2” capacity.

The IT-9915 series of grinders are built for production and long life. Adjustable exhaust, Heavy duty safety lockoff lever. Use type 27 wheels (not included).

This lightweight, rugged 1.0 horsepower sander is excellent for shaping and contouring patches, sanding body filler
and for heavy rust removal. Comes complete with a rubber backup pad – (our IT-7470A).

*Regulator
*Full ball bearing construction *Built-in silencer
* 1/8” Orbit

Our best 2” DA Sander for getting in hard to reach spots where finish work is needed.

The IT-9988HD is small, compact, lightweight and strong. This tool easily drills 1/2” holes in concrete. Comes with cushioned grip, side handle and 1/2” drill chuck.

The IT-8826 is a super stubby 3/8” Ratchet Wrench that fits in the palm of your hand.
A 1/4” hex hole in the anvil will accept 1/4” Apex screwdriver bits. The convenience of this tool is hard to believe, reaching into places like no other.

Sander Backup Pads for IT-7778.

The IT-7761 & IT-7761AH are reversible and produce accurate torque. The clutches are internally adjustable and feature rear exhaust.

The IT-8857R, IT-8859R and IT-8869R are .45 HP cushioned grip die grinders. With plenty of power and their compact size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool.