Compare products

 
 
  Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x
7715N67V
IT-881647V
IT-7768
IT-7007N
IT-3010
IT-9988HRS-A
IT-7472
IT-7415V
IT-7768RAH
IT-7787RN
8818P11
IT-7768R
IT-7701
IT-7757D
IT-9988HD
IT-7767RNA600
IT-7445
IT-7010AN
IT-7768HRK
IT-9888MK
IT-9754
IT-9750-C
IT-7121K
Title 7715N67V 5" Velcro Pad for IT-7815A IT-881647V 7" Velcro Poly Pad IT-7768 Super Duty 3/8" Non Reversible Drill IT-7007N Spray Gun & No Drip Cup IT-3010 Air Grease Gun IT-9988HRS-A 5/8" Drill Chuck w/ taper IT-7472 7 1/2" Wool Polishing Pad IT-7415V 5” DA Pad - 5/16-24 IT-7768RAH 3/8" Angle Drill IT-7787RN 3/8" Reversible 90 Degree Drill 8818P11 Adapter for T-8818P IT-7768R Super Duty 3/8" Reversible Drill IT-7701 Heavy Duty Metal Shear IT-7757D 3/8" Straight High Speed Drill IT-9988HD 1/2" Hammer Drill IT-7767RNA600 IT-7445 SL DA Sander w/ safety lever IT-7010AN 3/8" x 13" Belt Sander IT-7768HRK 1/2" Reversible Drill w/ Keyless Chuck IT-9888MK 1/4" Metal Keyless Chuck IT-9754 Pancake Drill 1/4-28 IT-9750-C 1/8" Drill Chuck, Key and Adapter IT-7121K Super Duty .401 Air Hammer Kit
Price $26.47 $17.83 $149.73 $100.77 $57.00 $81.19 $13.80 $8.61 $212.52 $134.18 $12.64 $149.73 $99.62 $63.91 $244.77 $510.31 $143.40 $139.94 $201.00 $141.09   $27.04 $178.53
Add to cart
Description

5″ Velcro Pad for IT-7815A and tools under 15,000 RPM.

7″ Velcro Poly Pad

Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only.

 

The IT-3010 holds 14 ounces (approximately 400cc) of grease. May be loaded from a tube, from a bulk dispenser, by suction, or by filling it with a scoop.

5/8”Drill Chuck with TAPERED MOUNT fits IT-9988HRS DRILL. Key is IT-9888HRS-B, Chuck and key is IT-9988HRS-C.

7 1/2″ Wool Polishing Pad

5” DA Pad – 5/16-24 for the IT-7311W5, IT-7445 and IT-7785. Has velcro face for abrasives with the hook and loop system.

Designed to be used in tight areas where only an angle can reach. Compact and easy to use, the angle head can be rotated 360 degrees.

•Quality hardened gears
•Rear Exhaust
•Variable Speed
•Forward and Reverse
•Angle head reaches into tight areas

Adapter has male thread 5/8-11.

Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only.

Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees.

Compact to work in confined spaces. The IT-7757D cannot be damaged by overloading. Drill, brush, hone or deburr without hazard of electric shock. (Not for use with cast wheels or accessories not rated for 25,000 RPM.)

The IT-9988HD is small, compact, lightweight and strong. This tool easily drills 1/2” holes in concrete. Comes with cushioned grip, side handle and 1/2” drill chuck.

Tool comes standard with one head, either 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, M3, M4, M5, M6 or M8. Additional heads available separately.

The IT-7445/IT-7446 have a smaller grip to better fit smaller hands. They both come with regulators and muffled exhaust.

Rugged and dependable

The IT-7768HR and IT-7768HRK have convenient forward and reverse lever, rear exhaust and all ball bearing construction.

Non-reversible, The IT-9888 is a quality 1/4” drill with the teasing throttle control you need. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4” Composite Keyless chuck as IT-9888K, with 1/4” Metal Keyless chuck as IT-9888MK and with 1/4” Hi-Precision Geared chuck as IT-9888SPC.

The 1/4-28 Drill Motors shown here give a wide range of use for tight spots encountered in aircraft manufacturing and any type of production drilling situation.

Fits any 1/4-28 threaded spindle with the use of our adapter from tapered shaft (inside chuck) to 1/4-28 thread.

The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks.

Sku - - - - - - - - - - - - - - - - - - - - - - -
Availability In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock
Weight .5 lbs .5 lbs 3.7 lbs 1.5 lbs 1.5 lbs .5 lbs .5 lbs .5 lbs 3.7 lbs 2.3 lbs .5 lbs 3.7 lbs 3.3 lbs 2 lbs 4.5 lbs 2.5 lbs 2.4 lbs 2 lbs 3.7 lbs 1.7 lbs 2 lbs .5 lbs 5 lbs
Dimensions N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Price $26.47 $17.83 $149.73 $100.77 $57.00 $81.19 $13.80 $8.61 $212.52 $134.18 $12.64 $149.73 $99.62 $63.91 $244.77 $510.31 $143.40 $139.94 $201.00 $141.09 $27.04 $178.53