Compare products

Small, lightweight and comfortable, the IT-7720N 3/8” Butterfly and the IT-9920 3/8” Butterfly Impacts are great for all types of assembly operations involving small fasteners. Excellent for transmission and body shops and all general mechanical work including production assembly. Both tools feature a 360 degree swivel regulator. Their compact size lets you reach the tightest areas.

Designed to be used in tight areas where only an angle can reach. Compact and easy to use, the angle head can be rotated 360 degrees.

The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks.

6” DA Pad 5/16-24 for the IT-7311, IT-7446 and IT-7786. Has velcro face for abrasives with the hook and loop system.

The IT-8758R and IT-8759R are the .35 HP version of the IT-8859R. With plenty of power and their smaller size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool.

Manual torque adjustment – tighten or loosen internal spring

These pistol grip screwdrivers are light and comfortable. Rear Exhaust directs air away from the operator and muffles exhaust noise. Location of reverse lever makes changing directions easy.

7 1/2″ Wool Polishing Pad

*.7 HP motor provides fast efficient grinding in tight spots
*Hardened spiral bevel gears in angle head for long life and low vibration
*Lock off lever standard
*Uses type 27 grinding wheels (not included)
*Built-in governor prevents overspeed

Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The IT-7151 has a longer stroke and heavier piston. The IT-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting.

The IT-7555B/IT-7556B have the same great specs as the IT-7555/IT-7556, but have a 3/32” orbit that can give a finer finish.

Compact to work in confined spaces. The IT-7757D cannot be damaged by overloading. Drill, brush, hone or deburr without hazard of electric shock. (Not for use with cast wheels or accessories not rated for 25,000 RPM.)

Straight Handle Rivet Gun, .498 Shank Rivet Gun.

The IT-8816 is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with
a foam 7” Velcro Pad – (IT-881647V). Sanders come with blue grip and run at 5500 RPM. Polishers have a red grip and are 2500 RPM. The IT-8816 & IT-8816P have all the bells and whistles – Rear exhaust – lock off levers – cushion grips – foam pads – low noise – grease fitting in head.

Small and easy to use, the IT-7702 cuts straight and curved shapes. Cuts aluminum, mild steel, plastic and fiberglass with ease. Comes with two blades (24 & 32 TPI).

The perfect tool for removal of dried out gasket material.
The IT-7703 will not harm underlying surface when using at the correct angle.

Spare pads for the IT-7211 & IT-7511.

*Lightweight
*Marks on materials up to 64R in hardness
*Trouble free piston design
*Low air consumption
*Twist throttle

*.7 HP motor provides fast efficient grinding in tight spots
*Hardened spiral bevel gears in angle head for long life and low vibration
*Lock off lever standard
*Uses type 27 grinding wheels (not included)
*Built-in governor prevents overspeed

IT-7922 Hose Swivel 1/4” NPT

3/4” Drill Chuck with TAPERED MOUNT fits IT-9988HRS DRILL. Key is IT-9988HRS34-B, Chuck and key is IT-9988HRS34-C.

The IT-7553 is small, compact and easy to use. It features heavy-duty ball bearing construction, built-in regulator and a smooth powerful cutting action. The 3” velcro pad makes for easy attachment of sanding disks. The 3/32” Orbit gives a fine finish for the most demanding work.

The IT-9915 series of grinders are built for production and long life. Adjustable exhaust, Heavy duty safety lockoff lever. Use type 27 wheels (not included).

The IT-8814EX is a Heavy Duty grinder designed for production grinding in foundries, shipyards, fabrication shops and any application that requires a powerful lightweight grinder.

IT-8859RS51 3″ Rolok Pad 5/16-24 Female

Compact, lightweight and hard hitting. The IT-8839 and IT-8839A have composite housings that are ideal for your toughest job. Twin hammer clutches have lots of power. Tool exausts through the bottom of the handle. Built-in regulator.

The IT-9555 & IT-9556 sanders are our smoothest running DA Sanders. Metal rotors and fiberglass pads help to improve cutting action and durability.

The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options.