Compare products

The IT-8957R is a remarkable tool. The direction of rotation can be changed to throw grinding sparks the opposite direction. This allows the operator to avoid contaminating nearby materials.

The IT-7556VAC/IT-7555VAC have the same great specs as the IT-7556/IT-7555, but are set up to be attached to an industrial vacuum cleaner.

These pistol grip screwdrivers are light and comfortable. Rear Exhaust directs air away from the operator and muffles exhaust noise. Location of reverse lever makes changing directions easy.

Smooth, quiet and reliable, the IT-7786 & IT-7785 have a fast cutting action with the least amount of vibration possible. Exhaust is through the handle and blows toward the air hose, not on your work.

A great tool for heavy duty scaling, the IT-7601 has a well cushioned rubber handle, heat treated piston and barrel.

The IT-7712 comes with the IT-771249 Rubber Eraser Wheel and the IT-771257 Stripper Wheel for Paint and Rust removal.

The IT-7553 is small, compact and easy to use. It features heavy-duty ball bearing construction, built-in regulator and a smooth powerful cutting action. The 3” velcro pad makes for easy attachment of sanding disks. The 3/32” Orbit gives a fine finish for the most demanding work.

The IT-8816 is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with
a foam 7” Velcro Pad – (IT-881647V). Sanders come with blue grip and run at 5500 RPM. Polishers have a red grip and are 2500 RPM. The IT-8816 & IT-8816P have all the bells and whistles – Rear exhaust – lock off levers – cushion grips – foam pads – low noise – grease fitting in head.

The IT-7665 is small, compact and easy to use. It features heavy-duty ball bearing construction, built-in regulator and a smooth powerful cutting action. The vinyl face pad makes for easy attachment of PSA sandpaper. Pad size is 90 x 90 x 80mm. Triangular Pad allows use in corners and tight spots. The 1/8” Orbit gives a fine finish and heavy cutting action for the most demanding work. Can be used for sanding, polishing and scrubbing.

Replacement 8″ pad for T-7777

IT-8859RS51 3″ Rolok Pad 5/16-24 Female

5″ Velcro Pad for IT-7815A and tools under 15,000 RPM.

Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The IT-7151 has a longer stroke and heavier piston. The IT-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting.

The IT-8816 is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with
a foam 7” Velcro Pad – (IT-881647V). Sanders come with blue grip and run at 5500 RPM. Polishers have a red grip and are 2500 RPM. The IT-8816 & IT-8816P have all the bells and whistles – Rear exhaust – lock off levers – cushion grips – foam pads – low noise – grease fitting in head.

Straight Handle Rivet Gun, .401 Shank Rivet Gun.

Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. Use an air blow gun to clean the head after extended use.

•Heavy Duty 5/8” Drill
•Plenty of Power
•Side Handle
•Tapered Chuck
•Twin Hammer Clutch

IT-4120 Spring for IT-1X and IT-1XS

Smooth, quiet and reliable, the IT-7786 & IT-7785 have a fast cutting action with the least amount of vibration possible. Exhaust is through the handle and blows toward the air hose, not on your work.

*1/2” Jacobs Chuck
*Requires only 5-1/2” Clearance
*One to one gear ratio
*Not for use with bits larger than 1/2”