| Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
| Title | IT-8759R 1/4" Rear Exhaust Angle Die Grinder | IT-7415V 5” DA Pad - 5/16-24 | IT-7616 Air Scribe (carbide tip) | IT-7768R Super Duty 3/8" Reversible Drill | IT-7402 70,000 RPM Pencil Grinder | 751138V 2” DA Pad | IT-7010 3/8" x 13" Belt Sander | 7815A02 Replacement 5" Plastic Pad for IT-7815A | IT-7111 Super Duty .401 Air Hammer | IT-5710 Brass Multi Position Regulator 1/4” NPT | IT-7701 Heavy Duty Metal Shear | IT-9916P 7" Angle Polisher |
| Price | $89.83 | $8.61 | $139.94 | $149.73 | $135.91 | $8.04 | $237.86 | $68.52 | $10.08 | $99.62 | $280.48 | |
| Add to cart | ||||||||||||
| Description |
The IT-8758R and IT-8759R are the .35 HP version of the IT-8859R. With plenty of power and their smaller size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool. |
5” DA Pad – 5/16-24 for the IT-7311W5, IT-7445 and IT-7785. Has velcro face for abrasives with the hook and loop system. |
*Lightweight |
Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only. |
The perfect tools for cleaning and polishing dies, porting and polishing engines, de-burring castings and any job where carbide burrs or stones are used for delicate material removal. The IT-7401 now comes in a storage case with oil bottle, quick disconnect fitting, IT-5830 oiler and 2 collet wrenches. |
2” DA Pads for the IT-7511 Velcro 6mm thread. |
Lightweight Belt Sander is built for heavy use. Exhaust muffler keeps dBA’s in the low 80’s. |
Replacement 5″ pad for IT-7815A |
Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The IT-7151 has a longer stroke and heavier piston. The IT-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting. |
IT-5710 Brass Multi Position Regulator 1/4” NPT |
Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees. |
Same great tool as the IT-9916 but with a lower gear ratio. RPM is 2500, the perfect polishing speed. Comes complete with a plastic backup pad. |
| Sku | - | - | - | - | - | - | - | - | - | - | - | - |
| Availability | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock |
| Weight | 1.5 lbs | .5 lbs | 1 lbs | 3.7 lbs | 5 lbs | .5 lbs | 2 lbs | .5 lbs | 4 lbs | .5 lbs | 3.3 lbs | 5 lbs |
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Price | $89.83 | $8.61 | $139.94 | $149.73 | $135.91 | $8.04 | $237.86 | $68.52 | $10.08 | $99.62 | $280.48 |