Compare products

The IT-8859G is small enough to reach the tightest areas. Rear exhaust and quiet operation. Complete with 2” type 27 wheel, swivel guard, grease fitting and built in regulator.

Non-reversible, The IT-9888 is a quality 1/4” drill with the teasing throttle control you need. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4” Composite Keyless chuck as IT-9888K, with 1/4” Metal Keyless chuck as IT-9888MK and with 1/4” Hi-Precision Geared chuck as IT-9888SPC.

The IT-8707 has a push button safety lock off lever, variable direction exhaust, built-in governor to maintain constant speed and a quiet and powerful 2 HP motor.

7 1/2″ Wool Polishing Pad

Straight Handle Rivet Gun, .401 Shank Rivet Gun.

*1/2” Jacobs Chuck
*Requires only 5-1/2” Clearance
*One to one gear ratio
*Not for use with bits larger than 1/2”

These pistol grip screwdrivers are light and comfortable. Rear exhaust directs air away from the operator and muffles the exhaust noise. Location of reverse lever makes changing directions easy.

IT-7788-KC 3/8″ Composite Keyless Drill Chuck. This chuck can be used on drills with forward and reverse. 3/8-24 thread Drill Chuck. Capacity 3/8”.

The IT-9555 & IT-9556 sanders are our smoothest running DA Sanders. Metal rotors and fiberglass pads help to improve cutting action and durability.

IT-77887BASPA 1/4” Special Jacobs 7BA Drill Chuck. 3/8-24 threads. Key is model IT-77887BASPB. High quality machined gear. Chuck and key are model IT-77887BASPC. This chuck can be used on forward and reversible drills. Capacity 0 to 1/4”.

7″ Rubber Pad

The IT-7555B/IT-7556B have the same great specs as the IT-7555/IT-7556, but have a 3/32” orbit that can give a finer finish.

IT-6120 Quick Change Spring for .498 Shank Hammers

The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options.

Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. Use an air blow gun to clean the head after extended use.

A great tool for heavy duty scaling, the IT-7601 has a well cushioned rubber handle, heat treated piston and barrel.

IT-7788-A 3/8” Standard Jacobs Multicraft Drill Chuck. 3/8-24 threads. Key is model IT-7788-B. Chuck and key are model IT-7788-C. This chuck can be used on forward and reversible drills. Capacity 3/8″

Patented vibration and noise reduced saw cuts steel, aluminum, stainless steel, wood, plastic and fiberglass with ease. Comes with the IT-7922 hose swivel and safety lock off lever. Lightweight and powerful cutting ac- tion make this a must have tool. Will easily cut wooden 2 X 4’s. The beauty of this saw is the 3/4” stroke, which uses more of the teeth on each stroke. Adjustable blade guard. Comes with three blades.

The IT-8826 is a super stubby 3/8” Ratchet Wrench that fits in the palm of your hand.
A 1/4” hex hole in the anvil will accept 1/4” Apex screwdriver bits. The convenience of this tool is hard to believe, reaching into places like no other.

Straight Handle Rivet Gun, .401 Shank Rivet Gun.

IT-6415V 5” Velcro Pad

The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks.

Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. Use an air blow gun to clean the head after extended use.

The IT-9888R is a quality 1/4” drill with the same teasing throttle control as above and a convenient reversing lever. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4”Composite Keyless chuck as IT-9888RK and with 1/4” Hi-Precision Geared chuck as IT-9888RSPC.

Same great tool as the IT-7718 but with a lower gear ratio. RPM is 2000, the perfect polishing speed. Comes complete with a rubber backup pad, our IT-7470A and the IT-7472 Wool Polishing Pad. A great tool for buffing and polishing paint, plastic, metal and wood.

IT-77882BASPA 3/8” Special Jacobs 2BA Drill Chuck. 3/8-24 threads. Key is model IT-77882BASPB. High quality machined gear. Chuck and key are model IT-77887BASPC. This chuck can be used on forward and reversible drills. Capacity 3/8”.

IT-6415 5” PSA Pad

*Built in regulator
*Lightweight aluminum
*Lock off lever
*Rear exhaust
*IT-7002A44 Carbide Wheel included

Straight Handle Rivet Gun, .401 Shank Rivet Gun.

The IT-7761 & IT-7761AH are reversible and produce accurate torque. The clutches are internally adjustable and feature rear exhaust.

*.7 HP motor provides fast efficient grinding in tight spots
*Hardened spiral bevel gears in angle head for long life and low vibration
*Lock off lever standard
*Uses type 27 grinding wheels (not included)
*Built-in governor prevents overspeed