| Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
|
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
|
|
| Title | IT-7788N 3/8" Pistol Grip Drill | IT-7705 Heavy Duty Reciprocating File | IT-4X Straight Handle Rivet Gun | IT-7556VAC 6" Palm Grip DA Sander Vacuum Ready 3/16" Orbit | IT-7012 1/2" x 24" Belt Sander | IT-7888 w/ 1/4" Standard Chuck | IT-8005 One Shot Hammer | IT-7415VV 5” DA Pad | 777827 4-1/2" Sander Backup Pad | IT-7728 3/8" Ratchet Wrench | IT-7311W5 5" DA Sander | IT-7454HPR .75HP Heavy Duty 3/8" Reversible Drill | IT-7581 3/16" Punch Flange | IT-5540K 2 Speed Drill w/ 3/8" Keyless Chuck | IT-3010 Air Grease Gun | IT-7716P 7" Angle Polisher | IT-5T Long Reach Sand Rammer | IT-7415 5” DA Pad - 5/16-24 | IT-7715N 5" Angle Grinder 5/8-11 | IT-7766 Positive Clutch Screwdriver | IT-7111 Super Duty .401 Air Hammer | 755546 6” DA Pad | IT-7701 Heavy Duty Metal Shear | IT-8859RS 15,000 RPM Angle Sander w/3" rolok pad | IT-9753 360 Degree Angle Drill 1/4-28 | IT-7777 8" Orbital Sander | IT-7007N Spray Gun & No Drip Cup | IT-7729 1/2" Ratchet Wrench | IT-7701SS Straight Handle Scissor Shear | 777826 3" Sander Backup Pads | IT-7768R Super Duty 3/8" Reversible Drill | IT-7555VAC 5" Palm Grip DA Sander Vacuum Ready 3/16" Orbit | IT-7416 6” DA Pad | IT-7768HR 1/2" Reversible Drill 800 RPM | IT-9556B 6" Super Duty DA Sander 3/32" Orbit | IT-7888A w/ 1/4" Standard Chuck | IT-7767RNA600 | IT-7788HR-KCN 1/2” Keyless Drill Chuck | IT-7718P 7" Vertical Polisher | IT-9915ND 5" w/Dust Collector 5/8-11 Spindle | IT-7764EX 1/4" Externally Adjustable Clutch Screwdriver | IT-881647V 7" Velcro Poly Pad | IT-2005 One Shot Hammer | IT-9940EXD Heavy Duty 3/8" Angle Drill | IT-7888A1B w/ 1/4" Jacobs 1B Chuck | IT-8857R 1/4" Rear Exhaust Die Grinder | IT-7416V 6” DA Pad | IT-7815A 5" Angle Sander | IT-7121K Super Duty .401 Air Hammer Kit | IT-7768 Super Duty 3/8" Non Reversible Drill | IT-5210 Beehive Spring | IT-7711 Air Nibbler | IT-9920 3/8" Butterfly Impact |
| Price | $68.52 | $130.72 | $236.71 | $177.96 | $291.43 | $111.14 | $550.05 | $20.71 | $3.60 | $67.36 | $77.73 | $118.05 | $106.53 | $168.74 | $57.00 | $171.62 | $737.83 | $8.61 | $144.55 | $149.73 | $68.52 | $15.52 | $99.62 | $103.65 | $178.53 | $100.77 | $67.36 | $130.72 | $2.85 | $149.73 | $177.96 | $9.19 | $168.74 | $205.03 | $118.05 | $510.31 | $23.01 | $176.23 | $311.01 | $299.49 | $17.83 | $361.12 | $414.12 | $139.94 | $57.57 | $9.19 | $161.25 | $178.53 | $149.73 | $2.59 | $105.96 | $109.41 | |
| Add to cart | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description |
•Quality hardened gears |
Built for production, the IT-7705 comes complete with round, flat, triangular and bastard files. |
Straight Handle Rivet Gun, .401 Shank Rivet Gun. |
The IT-7556VAC/IT-7555VAC have the same great specs as the IT-7556/IT-7555, but are set up to be attached to an industrial vacuum cleaner. |
Lightweight Belt Sander is built for heavy duty use. Exhaust muffler keeps dBA’s in the low 80’s. Long reach makes tough jobs accessible. |
The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options. |
Our One Shot hammers are designed for operations requiring less power, including driving oil seals, bushings and pins. Every pull of the lever delivers a single blow that can be regulated by adjusting the air pressure. |
5” DA Pad for use with IT-7555VAC Spindle size- 5/16-24 Velcro face. |
Sander Backup Pads for IT-7778. |
Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. |
*Built-in Regulator |
*Teasing throttle |
The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options. |
The IT-3010 holds 14 ounces (approximately 400cc) of grease. May be loaded from a tube, from a bulk dispenser, by suction, or by filling it with a scoop. |
The IT-7716P Same great tool as the IT-7716 but with a lower gear ratio. RPM is 2500, the perfect polishing speed. Comes complete with a rubber backup pad (our IT-7470A) and the IT-7472 Wool Polishing Pad. |
The IT-5T Sand Rammer is a hard hitting Heavy Duty Rammer built for production use in foundries, construction sites, utility companies or wherever a Rammer is used. |
5” DA Pad – 5/16-24 |
*.7 HP motor provides fast efficient grinding in tight spots |
These pistol grip screwdrivers are light and comfortable. Rear exhaust directs air away from the operator and muffles the exhaust noise. Location of reverse lever makes changing directions easy. |
Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The IT-7151 has a longer stroke and heavier piston. The IT-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting. |
6” DA Pad – 5/16-24 for the IT-7556, IT-9556, IT-7311, IT-7446 and IT-7786. |
Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees. |
A new addition based on the IT-8859R. Rolok pad makes easy and convenient abrasive changes. |
The 1/4-28 Drill Motors shown here give a wide range of use for tight spots encountered in aircraft manufacturing and any type of production drilling situation. |
Fast material removal is accomplished with a gear driven 50 square inch pad. Ideal for applications between grinding and finish sanding. Eliminates scratch patterns. |
Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. |
Sander Backup Pads for IT-7778. |
Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only. |
The IT-7556VAC/IT-7555VAC have the same great specs as the IT-7556/IT-7555, but are set up to be attached to an industrial vacuum cleaner. |
6” DA Pad – 5/16-24 for the IT-7311, IT-7446 and IT-7786. PSA – Has vinyl face for pressure sensitive adhesive abrasives. |
The IT-7768HR and IT-7768HRK have convenient forward and reverse lever, rear exhaust and all ball bearing construction. |
The IT-9555 & IT-9556 sanders are our smoothest running DA Sanders. Metal rotors and fiberglass pads help to improve cutting action and durability. |
The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip. |
Tool comes standard with one head, either 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, M3, M4, M5, M6 or M8. Additional heads available separately. |
IT-7788HR-KCN 1/2” Keyless Drill Chuck. Makes changing drill bits easy. This chuck can be used for for- ward and reversible drills. 3/8-24 threads. 1/2” capacity. |
Same great tool as the IT-7718 but with a lower gear ratio. RPM is 2000, the perfect polishing speed. Comes complete with a rubber backup pad, our IT-7470A and the IT-7472 Wool Polishing Pad. A great tool for buffing and polishing paint, plastic, metal and wood. |
The IT-9915 series of grinders are built for production and long life. Adjustable exhaust, Heavy duty safety lockoff lever. Use type 27 wheels (not included). |
These pistol grip screwdrivers are light and comfortable. Rear Exhaust directs air away from the operator and muffles exhaust noise. Location of reverse lever makes changing directions easy. |
7″ Velcro Poly Pad |
Our One Shot hammers are designed for operations requiring less power, including driving oil seals, bushings and pins. Every pull of the lever delivers a single blow that can be regulated by adjusting the air pressure. |
The IT-9940EXD is an exceptionally Heavy Duty 3/8” Angle Drill. Free Speed is 13,500, Spindle size is 3/8-24, Weight is 4 lbs., length is 12.5”. Forward direction only. Air cons. @ load- 26CFM |
The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip. |
The IT-8857R, IT-8859R and IT-8869R are .45 HP cushioned grip die grinders. With plenty of power and their compact size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool. |
6” DA Pad 5/16-24 for the IT-7311, IT-7446 and IT-7786. Has velcro face for abrasives with the hook and loop system. |
The IT-7815A features heavy duty alloy steel gears, safety lock off lever, lightweight aluminum housing, built-in regulator and convenient side handle. Rear exhaust. |
The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks. |
Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only. |
IT-5210 Beehive Spring for .401 Shank Hammers |
*Teasing Throttle |
Small, lightweight and comfortable, the IT-7720N 3/8” Butterfly and the IT-9920 3/8” Butterfly Impacts are great for all types of assembly operations involving small fasteners. Excellent for transmission and body shops and all general mechanical work including production assembly. Both tools feature a 360 degree swivel regulator. Their compact size lets you reach the tightest areas. |
|||
| Sku | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Availability | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock |
| Weight | 2.3 lbs | 3 lbs | 5.5 lbs | 2.7 lbs | 2.3 lbs | 2.5 lbs | 3 lbs | .5 lbs | .5 lbs | 2.7 lbs | 4.5 lbs | 3.3 lbs | 1.5 lbs | 3 lbs | 1.5 lbs | 5 lbs | 22 lbs | .5 lbs | 4.3 lbs | 2.5 lbs | 4 lbs | .5 lbs | 3.3 lbs | 2 lbs | 2 lbs | 4.5 lbs | 1.5 lbs | 2.7 lbs | 3.3 lbs | .5 lbs | 3.7 lbs | 2.7 lbs | .5 lbs | 3.7 lbs | 2.5 lbs | 2.5 lbs | 2.5 lbs | .5 lbs | 5.5 lbs | 3.5 lbs | 3.5 lbs | .5 lbs | 3 lbs | 3 lbs | 2.5 lbs | 1.5 lbs | .5 lbs | 4.5 lbs | 5 lbs | 3.7 lbs | .5 lbs | 2.5 lbs | 2.6 lbs |
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Price | $68.52 | $130.72 | $236.71 | $177.96 | $291.43 | $111.14 | $550.05 | $20.71 | $3.60 | $67.36 | $77.73 | $118.05 | $106.53 | $168.74 | $57.00 | $171.62 | $737.83 | $8.61 | $144.55 | $149.73 | $68.52 | $15.52 | $99.62 | $103.65 | $178.53 | $100.77 | $67.36 | $130.72 | $2.85 | $149.73 | $177.96 | $9.19 | $168.74 | $205.03 | $118.05 | $510.31 | $23.01 | $176.23 | $311.01 | $299.49 | $17.83 | $361.12 | $414.12 | $139.94 | $57.57 | $9.19 | $161.25 | $178.53 | $149.73 | $2.59 | $105.96 | $109.41 |