Compare products

 
 
  Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x
IT-7010AN
IT-6922R
IT-7788HR-KCN
IT-7415V
IT-7311
IT-7761
Placeholder
IT-7712
IT-7763EX
IT-7151C
IT-7555
755545
IT-7767RNA350
IT-9750EX
IT-7838D
IT-7111
IT-9800
Title IT-7010AN 3/8" x 13" Belt Sander IT-6922R Regulated Hose Swivel 1/4" NPT IT-8816 7" Angle Sander IT-7716DS 4500 RPM Drum Sander IT-7511 2" Angle DA Sander IT-7788HR-KCN 1/2” Keyless Drill Chuck IT-7415V 5” DA Pad - 5/16-24 IT-7311SL with Safety Lever IT-7716W 7" WET Angle Sander IT-9556B 6" Super Duty DA Sander 3/32" Orbit IT-7761 1/4" Straight Handle Screwdriver IT-7888MK 1/4" Metal Keyless Chuck IT-7712 Paint & Decal Removal Tool IT-7763EX 1/4" Externally Adjustable Clutch Screwdriver IT-7151C Super Duty .401 Air Hammer with Needle Scaler IT-7555B 5" DA Sander 3/32" Orbit 755545 5” DA Pad - 5/16-24 IT-7767RNA350 Rivnut Tool IT-9902 Vibration Reduced Saw (9500 SPM) IT-9750EX 90 Degree Extended Aircraft Drill IT-7838D Windshield Removal Tool IT-7728 3/8" Ratchet Wrench IT-8707 7" Heavy Duty Angle Grinder IT-7111 Super Duty .401 Air Hammer IT-9800 M3-M12 Tapping Tool IT-7311 6" DA Sander
Price $139.94 $7.65 $342.69 $255.14 $129.57 $23.01 $8.61 $84.64 $249.38 $205.03 $126.69 $148.00 $213.09 $293.73 $130.15 $166.44 $15.52 $510.31 $287.97     $67.36 $560.42 $68.52 $517.80 $77.73
Add to cart
Description

Rugged and dependable

IT-6922R Regulated Hose Swivel 1/4″ NPT

The IT-8816 is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with
a foam 7” Velcro Pad – (IT-881647V). Sanders come with blue grip and run at 5500 RPM. Polishers have a red grip and are 2500 RPM. The IT-8816 & IT-8816P have all the bells and whistles – Rear exhaust – lock off levers – cushion grips – foam pads – low noise – grease fitting in head.

These lightweight sander/polishers are excellant for producing a uniform surface finish without leaving shadows or transition lines. The perfect tools for cleaning welds, roughing, deburring, glazing, brushing, blending, graining, polishing and finishing.

A great finishing sander. Smooth and quiet, yet has a fast cutting action.

*Rear Exhaust
*Full ball bearing construction
*Designed for small finishing jobs

IT-7788HR-KCN 1/2” Keyless Drill Chuck. Makes changing drill bits easy. This chuck can be used for for- ward and reversible drills. 3/8-24 threads. 1/2” capacity.

5” DA Pad – 5/16-24 for the IT-7311W5, IT-7445 and IT-7785. Has velcro face for abrasives with the hook and loop system.

(specify 5″ or 6″ pad)

IT-7311/IT-7311W5

*Built-in Regulator
*1/2 HP motor
*Full ball bearing construction
*Built-in silencer
*Balanced counter weight design
*Locking shaft for easy pad removal
*Available with Velcro pad (specify when ordering)
*3/8” Orbit

*All ball bearing construction
*Side handle for right or left operation
*Built-in regulator
*Hardened and ground spiral bevel gears
*Adjustable water feed through the spindle

The IT-9555 & IT-9556 sanders are our smoothest running DA Sanders. Metal rotors and fiberglass pads help to improve cutting action and durability.

The IT-7761 & IT-7761AH are reversible and produce accurate torque. The clutches are internally adjustable and feature rear exhaust.

The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options.

The IT-7712 comes with the IT-771249 Rubber Eraser Wheel and the IT-771257 Stripper Wheel for Paint and Rust removal.

These pistol grip screwdrivers are light and comfortable. Rear Exhaust directs air away from the operator and muffles exhaust noise. Location of reverse lever makes changing directions easy.

Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The IT-7151 has a longer stroke and heavier piston. The IT-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting.

The IT-7555B/IT-7556B have the same great specs as the IT-7555/IT-7556, but have a 3/32” orbit that can give a finer finish.

5” DA Pad – 5/16-24
for the IT-7555, IT-9555, IT-7311W5, IT-7445 and IT-7785. Thin pad for use with PSA abrasives.

Tool comes standard with one head, either 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, M3, M4, M5, M6 or M8. Additional heads available separately.

Patented vibration and noise reduced saw cuts steel, aluminum, stainless steel, wood, plastic and fiberglass with ease. Comes with the IT-7922 hose swivel and safety lock off lever. Lightweight and powerful cutting ac- tion make this a must have tool. Will easily cut wooden 2 X 4’s. The beauty of this saw is the 3/4” stroke, which uses more of the teeth on each stroke. Adjustable blade guard. Comes with three blades.

The 1/4-28 Drill Motors shown here give a wide range of use for tight spots encountered in aircraft manufacturing and any type of production drilling situation.

The IT-7838D comes complete with air supply hose and exhaust hose. Also provided is our IT-783851 2-1/2” offset blade. This tool is a must for every glass shop and may be used with a wide range of blades.

Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure.

The IT-8707 has a push button safety lock off lever, variable direction exhaust, built-in governor to maintain constant speed and a quiet and powerful 2 HP motor.

Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The IT-7151 has a longer stroke and heavier piston. The IT-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting.

Tapping Capacity-Aluminum: M3-M12
Tapping Capacity-Steel: M3-M8
Free Speed: 150 RPM
Length: 7.87″
Weight: 4.10 lbs.
Air Pressure: 90 PSI Max.

*Built-in Regulator
*1/2 HP motor
*Full ball bearing construction
*Built-in silencer
*Balanced counter weight design
*Locking shaft for easy pad removal
*Available with Velcro pad (specify when ordering)
*3/8” Orbit

Sku - - - - - - - - - - - - - - - - - - - - - - - - - -
Availability In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock
Weight 2 lbs .5 lbs 5 lbs 4 lbs 1.5 lbs .5 lbs .5 lbs 4.5 lbs 5 lbs 2.5 lbs 1.5 lbs 2.5 lbs 3.7 lbs 3.5 lbs 5 lbs 2.3 lbs .5 lbs 2.5 lbs 1.5 lbs 2 lbs 2.5 lbs 2.7 lbs 7 lbs 4 lbs 4.5 lbs 4.5 lbs
Dimensions N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Price $139.94 $7.65 $342.69 $255.14 $129.57 $23.01 $8.61 $84.64 $249.38 $205.03 $126.69 $148.00 $213.09 $293.73 $130.15 $166.44 $15.52 $510.31 $287.97 $67.36 $560.42 $68.52 $517.80 $77.73