Compare products

Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees.

6” DA Pad for use with IT-7556VAC Spindle size- 5/16-24 Velcro face.

Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only.

Straight Handle Rivet Gun, .401 Shank Rivet Gun.

The IT-7838D comes complete with air supply hose and exhaust hose. Also provided is our IT-783851 2-1/2” offset blade. This tool is a must for every glass shop and may be used with a wide range of blades.

The IT-7749 has a steel clutch cover for use in demanding applications. A strong tool with 500 ft.lbs torque in forward and 600 ft.lbs. in reverse.

•Quality hardened gears
•Rear Exhaust
•Variable Speed
•Forward and Reverse
•Angle head reaches into tight areas

IT-6416VV Velcro Vacuum Pad

5” DA Pad for use with IT-7555VAC Spindle size- 5/16-24 Velcro face.

The IT-7553 is small, compact and easy to use. It features heavy-duty ball bearing construction, built-in regulator and a smooth powerful cutting action. The 3” velcro pad makes for easy attachment of sanding disks. The 3/32” Orbit gives a fine finish for the most demanding work.

6” DA Pad 5/16-24 for the IT-7311, IT-7446 and IT-7786. Has velcro face for abrasives with the hook and loop system.

Non-reversible, The IT-9888 is a quality 1/4” drill with the teasing throttle control you need. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4” Composite Keyless chuck as IT-9888K, with 1/4” Metal Keyless chuck as IT-9888MK and with 1/4” Hi-Precision Geared chuck as IT-9888SPC.

6” DA Pad – 5/16-24 for the IT-7556, IT-9556, IT-7311, IT-7446 and IT-7786.
Thin pad for use with PSA abrasives.

5” DA Pad – 5/16-24 for the IT-7311W5, IT-7445 and IT-7785. Has velcro face for abrasives with the hook and loop system.

Smooth, quiet and reliable, the IT-7786 & IT-7785 have a fast cutting action with the least amount of vibration possible. Exhaust is through the handle and blows toward the air hose, not on your work.

The IT-9988HD is small, compact, lightweight and strong. This tool easily drills 1/2” holes in concrete. Comes with cushioned grip, side handle and 1/2” drill chuck.

*.7 HP motor provides fast efficient grinding in tight spots
*Hardened spiral bevel gears in angle head for long life and low vibration
*Lock off lever standard
*Uses type 27 grinding wheels (not included)
*Built-in governor prevents overspeed

The 1/4-28 Drill Motors shown here give a wide range of use for tight spots encountered in aircraft manufacturing and any type of production drilling situation.

Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The IT-7151 has a longer stroke and heavier piston. The IT-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting.

Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees.

*Built in regulator
*Lightweight aluminum
*Lock off lever
*Rear exhaust
*IT-7002A44 Carbide Wheel included

These pistol grip screwdrivers are light and comfortable. Rear exhaust directs air away from the operator and muffles the exhaust noise. Location of reverse lever makes changing directions easy.

5” DA Pad for use with IT-7555VAC Spindle size 5/16-24 PSA vinyl face.

The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options.

2” DA Pads for the IT-7511 Velcro 6mm thread.

*All ball bearing construction
*Side handle for right or left operation
*Built-in regulator
*Hardened and ground spiral bevel gears
*Adjustable water feed through the spindle

*Operates in any position
*Tool stops when nail is set
*Drives up to 60 penny nails
*Pressure activated

The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip.

These pistol grip screwdrivers are light and comfortable. Rear exhaust directs air away from the operator and muffles the exhaust noise. Location of reverse lever makes changing directions easy.

The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options.

Sander Backup Pads for IT-7778.

A great 1/2” production drill with HiTorque Double reduction gears.

• Built-in regulator
• Long life twin hammer clutch
• Ring type socket retainer
• High performance motor
• Light weight aluminum handle
• Comfort grip
• Convenient forward and reverse

Spare pads for the IT-7211 & IT-7511.

Compact to work in confined spaces. The IT-7757D cannot be damaged by overloading. Drill, brush, hone or deburr without hazard of electric shock. (Not for use with cast wheels or accessories not rated for 25,000 RPM.)