Compare products

The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options.

Sander Backup Pads for IT-7778.

The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks.

The IT-9940EXD is an exceptionally Heavy Duty 3/8” Angle Drill. Free Speed is 13,500, Spindle size is 3/8-24, Weight is 4 lbs., length is 12.5”. Forward direction only. Air cons. @ load- 26CFM

The IT-7553 is small, compact and easy to use. It features heavy-duty ball bearing construction, built-in regulator and a smooth powerful cutting action. The 3” velcro pad makes for easy attachment of sanding disks. The 3/32” Orbit gives a fine finish for the most demanding work.

This lightweight, rugged 1.0 horsepower sander is excellent for shaping and contouring patches, sanding body filler
and for heavy rust removal. Comes complete with a rubber backup pad – (our IT-7470A).

Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The IT-7151 has a longer stroke and heavier piston. The IT-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting.

The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip.

IT-5210 Beehive Spring for .401 Shank Hammers

*Operates in any position
*Tool stops when nail is set
*Drives up to 60 penny nails
*Pressure activated

The IT-7768HR and IT-7768HRK have convenient forward and reverse lever, rear exhaust and all ball bearing construction.

The beauty of the IT-9825NK is two fold. A 1/4” & a 3/8” drive are in IT-9825NK the kit. Just remove drive and flip it around for reverse. The second part is that a set of 10 sockets are with the tool, that fit directly into the head, leaving the center open so that a threaded rod or long bolt can pass through.

Straight Handle Rivet Gun, .401 Shank Rivet Gun.

6” DA Pad 5/16-24 for the IT-7311, IT-7446 and IT-7786. Has velcro face for abrasives with the hook and loop system.

(uses our IT-9801341 4” Cutoff Wheel) same great tool as the IT-8801REX, but with short reach

Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The IT-7151 has a longer stroke and heavier piston. The IT-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting.

*.7 HP motor provides fast efficient grinding in tight spots
*Hardened spiral bevel gears in angle head for long life and low vibration
*Lock off lever standard
*Uses type 27 grinding wheels (not included)
*Built-in governor prevents overspeed

The IT-8857R, IT-8859R and IT-8869R are .45 HP cushioned grip die grinders. With plenty of power and their compact size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool.

Fast material removal is accomplished with a gear driven 50 square inch pad. Ideal for applications between grinding and finish sanding. Eliminates scratch patterns.

Powerful, lightweight and easy to use, the IT-9969G grinder makes quick work of grinding steel, aluminum, composites and wood. Built-in regulator for precise speed control. Hardened cylinder and end plates. Rear exhaust. 105 degree angle head. Uses type 27 wheel (included).