| Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
|
 |
|
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
| Title | IT-7761AH 1/4" Right Angle Screwdriver | IT-7787RN 3/8" Reversible 90 Degree Drill | IT-7010 3/8" x 13" Belt Sander | IT-7416V 6” DA Pad | IT-9888RSPC 1/4" Special Hi Precision Drill & Chuck | IT-DA90 3/8" Drill Attachment | IT-7020A 3/4" x 20-1/2" Belt Sander | IT-7580 5/16" Punch Flange | IT-9920 3/8" Butterfly Impact | IT-7470A 7" Rubber Pad | 751138V 2" Velcro DA Pad 6mm | IT-7888-A 1/4" Drill Chuck Jacobs Multicraft | IT-2430EX Push to Start Auto Shut Off Screwdriver | IT-7718P 7" Vertical Polisher | IT-7888A w/ 1/4" Standard Chuck | IT-7700SS Pistol Grip Scissor Shear | IT-7768HR 1/2" Reversible Drill 800 RPM | IT-7768R Super Duty 3/8" Reversible Drill | IT-9888-A 1/4" Special Precision Drill Chuck | IT-7888KC 1/4" Composite Keyless Chuck | IT-7768R-SPA 3/8” Special Hi-Precision Drill Chuck | 8818P11 Adapter for T-8818P | IT-9555B 5" Super Duty DA Sander 3/32" Orbit | 751138 2" PSA DA Pad 6mm | IT-7788K 3/8" Pistol Grip Reversible Drill | IT-9988HRS34-A 3/4" Drill Chuck w/ taper | IT-7007N Spray Gun & No Drip Cup | IT-5540SPC 2 Speed Drill w/ 3/8" Precision Chuck | IT-7701 Heavy Duty Metal Shear | IT-7060 1/4" x 13" Belt Sander | IT-7788HR 1/2" Pistol Grip Reversible Drill | IT-7768 Super Duty 3/8" Non Reversible Drill | 755338 3” DA Pad | IT-7788N 3/8" Pistol Grip Drill | IT-7788R 3/8" Pistol Grip Reversible Drill | 777827 4-1/2" Sander Backup Pad | IT-7445 SL DA Sander w/ safety lever | IT-7788FK 3/8" Pistol Grip Drill w/ Keyless Chuck | IT-8758R 1/4" Rear Exhaust Die Grinder | IT-9916 7" Angle Sander | IT-7768HRK 1/2" Reversible Drill w/ Keyless Chuck | IT-9988HD 1/2" Hammer Drill | 755344 3-1/2” Polishing Pad | 7715N67V 5" Velcro Pad for IT-7815A | IT-7415VV 5” DA Pad | IT-7151 Super Duty .401 Air Hammer | IT-9751 45 Degree Aircraft Drill | IT-7703 Gasket Scraper | IT-8759R 1/4" Rear Exhaust Angle Die Grinder | IT-9969G 4" Angle Grinder w/ 5/8-11 Spindle | IT-8801R 4" Reversible Angle Cutoff Tool | IT-7768RAH 3/8" Angle Drill | IT-7767RNA600 | IT-8857R 1/4" Rear Exhaust Die Grinder | IT-7711 Air Nibbler | IT-9750-C 1/8" Drill Chuck, Key and Adapter | IT-8825 1/4" Ratchet Wrench | 721128 2" PSA DA Pad 1/4-20 | IT-7730 1/2" Ratchet Wrench | IT-6416VV Velcro Vacuum Pad | IT-7720N 3/8" Butterfly Impact | IT-7922R Regulated Hose Swivel 1/4” NPT | IT-7715N 5" Angle Grinder 5/8-11 | IT-7749L 2" Extended Anvil | 777828 5" Sander Backup Pad | 755545 5” DA Pad - 5/16-24 |
| Price | $300.07 | $134.18 | $237.86 | $9.19 | $132.45 | $50.08 | $230.37 | $134.18 | $109.41 | $22.44 | $8.04 | $10.92 | $368.04 | $176.23 | $118.05 | $130.72 | $168.74 | $149.73 | $21.28 | $112.29 | $28.77 | $12.64 | $205.03 | $8.04 | $74.85 | $100.77 | $176.23 | $99.62 | $124.39 | $149.73 | $14.37 | $68.52 | $74.85 | $3.60 | $143.40 | $71.97 | $56.42 | $280.48 | $201.00 | $244.77 | $11.49 | $26.47 | $20.71 | $83.49 | $56.42 | $89.83 | $186.02 | $187.17 | $212.52 | $510.31 | $57.57 | $105.96 | $27.04 | $93.86 | $8.04 | $167.59 | $8.29 | $76.58 | $14.37 | $144.55 | $253.41 | $3.60 | $15.52 | |||
| Add to cart | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description |
The IT-7761 & IT-7761AH are reversible and produce accurate torque. The clutches are internally adjustable and feature rear exhaust. |
•Quality hardened gears |
Lightweight Belt Sander is built for heavy use. Exhaust muffler keeps dBA’s in the low 80’s. |
6” DA Pad 5/16-24 for the IT-7311, IT-7446 and IT-7786. Has velcro face for abrasives with the hook and loop system. |
The IT-9888R is a quality 1/4” drill with the same teasing throttle control as above and a convenient reversing lever. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4”Composite Keyless chuck as IT-9888RK and with 1/4” Hi-Precision Geared chuck as IT-9888RSPC. |
*3/8” Jacobs Chuck |
Lightweight Belt Sander is built for heavy use. |
Small, lightweight and comfortable, the IT-7720N 3/8” Butterfly and the IT-9920 3/8” Butterfly Impacts are great for all types of assembly operations involving small fasteners. Excellent for transmission and body shops and all general mechanical work including production assembly. Both tools feature a 360 degree swivel regulator. Their compact size lets you reach the tightest areas. |
7″ Rubber Pad |
Spare pads for the IT-7211 & IT-7511. |
IT-7888-A 1/4” Drill Chuck Jacobs Multicraft Standard Drill Chuck. 3/8-24 threads. Key is model IT-7788-B(fits IT-7888-A & IT-7788-A chucks). Chuck and key are model IT-7888-C. This chuck can be used on forward and reversible drills. Capacity 0 to 1/4”. |
*Reversible |
Same great tool as the IT-7718 but with a lower gear ratio. RPM is 2000, the perfect polishing speed. Comes complete with a rubber backup pad, our IT-7470A and the IT-7472 Wool Polishing Pad. A great tool for buffing and polishing paint, plastic, metal and wood. |
The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip. |
The IT-7768HR and IT-7768HRK have convenient forward and reverse lever, rear exhaust and all ball bearing construction. |
Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only. |
IT-9888-A 1/4” Special Precision Drill Chuck. Machined gear. 3/8-24 threads. Key is model IT-9888-B. Chuck and key are model IT-9888-C. This chuck can be used on forward and reversible drills. Capacity 0 to 1/4”. |
The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options. |
IT-7768R-SPA 3/8” Special Hi-Precision Drill Chuck. 3/8-24 threads. Machined gear. Key is model IT-7768R- SPB. Chuck and key are model IT-7768R- SPC. This chuck can be used on forward and reversible drills. Capacity 3/8”. |
Adapter has male thread 5/8-11. |
The IT-9555 & IT-9556 sanders are our smoothest running DA Sanders. Metal rotors and fiberglass pads help to improve cutting action and durability. |
Spare pads for the IT-7211 & IT-7511. |
The IT-7788R and IT-7788K are great for those tough jobs that need extra power. Excellent tool for honing, reaming, wire brushing, hole sawing, and heavy duty drilling. Plus they are reversing. |
3/4” Drill Chuck with TAPERED MOUNT fits IT-9988HRS DRILL. Key is IT-9988HRS34-B, Chuck and key is IT-9988HRS34-C. |
The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options. |
Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees. |
Lightweight Belt Sander is built for heavy use. Exhaust muffler keeps dBA’s in the low 80’s. |
A great 1/2” production drill with HiTorque Double reduction gears. |
Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only. |
3” DA Pad 5/16-24 for the IT-7553. PSA Vinyl Face. |
•Quality hardened gears |
The IT-7788R and IT-7788K are great for those tough jobs that need extra power. Excellent tool for honing, reaming, wire brushing, hole sawing, and heavy duty drilling. Plus they are reversing. |
Sander Backup Pads for IT-7778. |
The IT-7445/IT-7446 have a smaller grip to better fit smaller hands. They both come with regulators and muffled exhaust. |
•Quality hardened gears |
The IT-8758R and IT-8759R are the .35 HP version of the IT-8859R. With plenty of power and their smaller size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool. |
This lightweight, rugged 1.3 horsepower sander is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with a plastic backup pad. Auxillary plastic handle rotates for left or right handed use, or straight up! |
The IT-7768HR and IT-7768HRK have convenient forward and reverse lever, rear exhaust and all ball bearing construction. |
The IT-9988HD is small, compact, lightweight and strong. This tool easily drills 1/2” holes in concrete. Comes with cushioned grip, side handle and 1/2” drill chuck. |
3-1/2” Polishing Pad for the IT-7553. For use with 755338V velcro pad. |
5″ Velcro Pad for IT-7815A and tools under 15,000 RPM. |
5” DA Pad for use with IT-7555VAC Spindle size- 5/16-24 Velcro face. |
Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The IT-7151 has a longer stroke and heavier piston. The IT-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting. |
The 1/4-28 Drill Motors shown here give a wide range of use for tight spots encountered in aircraft manufacturing and any type of production drilling situation. |
The perfect tool for removal of dried out gasket material. |
The IT-8758R and IT-8759R are the .35 HP version of the IT-8859R. With plenty of power and their smaller size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool. |
Powerful, lightweight and easy to use, the IT-9969G grinder makes quick work of grinding steel, aluminum, composites and wood. Built-in regulator for precise speed control. Hardened cylinder and end plates. Rear exhaust. 105 degree angle head. Uses type 27 wheel (included). |
(uses our IT-9801341 4” Cutoff Wheel) same great tool as the IT-8801REX, but with short reach |
Designed to be used in tight areas where only an angle can reach. Compact and easy to use, the angle head can be rotated 360 degrees. |
Tool comes standard with one head, either 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, M3, M4, M5, M6 or M8. Additional heads available separately. |
The IT-8857R, IT-8859R and IT-8869R are .45 HP cushioned grip die grinders. With plenty of power and their compact size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool. |
*Teasing Throttle |
Fits any 1/4-28 threaded spindle with the use of our adapter from tapered shaft (inside chuck) to 1/4-28 thread. |
Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. Use an air blow gun to clean the head after extended use. |
Spare pads for the IT-7211 & IT-7511. |
*Teasing throttle This high torque ratchet handles those tough fasteners in tight places. |
IT-6416VV Velcro Vacuum Pad |
Small, lightweight and comfortable, the IT-7720N 3/8” Butterfly and the IT-9920 3/8” Butterfly Impacts are great for all types of assembly operations involving small fasteners. Excellent for transmission and body shops and all general mechanical work including production assembly. Both tools feature a 360 degree swivel regulator. Their compact size lets you reach the tightest areas. |
IT-7922R Regulated Hose Swivel 1/4” NPT |
*.7 HP motor provides fast efficient grinding in tight spots |
The IT-7749 has a steel clutch cover for use in demanding applications. A strong tool with 500 ft.lbs torque in forward and 600 ft.lbs. in reverse. |
Sander Backup Pads for IT-7778. |
5” DA Pad – 5/16-24 |
|||
| Sku | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Availability | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock |
| Weight | 2 lbs | 2.3 lbs | 2 lbs | .5 lbs | 1.7 lbs | .5 lbs | 3.4 lbs | 1.5 lbs | 2.6 lbs | .5 lbs | .5 lbs | .5 lbs | 1.8 lbs | 5.5 lbs | 2.5 lbs | 3.4 lbs | 3.7 lbs | 3.7 lbs | .5 lbs | 2.5 lbs | .5 lbs | .5 lbs | 2.5 lbs | .5 lbs | 2.3 lbs | .5 lbs | 1.5 lbs | 3 lbs | 3.3 lbs | 2 lbs | 3.7 lbs | 3.7 lbs | .5 lbs | 2.3 lbs | 2.3 lbs | .5 lbs | 2.4 lbs | 2.3 lbs | 1.5 lbs | 5 lbs | 3.7 lbs | 4.5 lbs | .5 lbs | .5 lbs | .5 lbs | 4 lbs | 2 lbs | 2.3 lbs | 1.5 lbs | 2.7 lbs | 2.7 lbs | 3.7 lbs | 2.5 lbs | 1.5 lbs | 2.5 lbs | .5 lbs | 1.3 lbs | .5 lbs | 4.5 lbs | .5 lbs | 2.3 lbs | .5 lbs | 4.3 lbs | 6 lbs | .5 lbs | .5 lbs |
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Price | $300.07 | $134.18 | $237.86 | $9.19 | $132.45 | $50.08 | $230.37 | $134.18 | $109.41 | $22.44 | $8.04 | $10.92 | $368.04 | $176.23 | $118.05 | $130.72 | $168.74 | $149.73 | $21.28 | $112.29 | $28.77 | $12.64 | $205.03 | $8.04 | $74.85 | $100.77 | $176.23 | $99.62 | $124.39 | $149.73 | $14.37 | $68.52 | $74.85 | $3.60 | $143.40 | $71.97 | $56.42 | $280.48 | $201.00 | $244.77 | $11.49 | $26.47 | $20.71 | $83.49 | $56.42 | $89.83 | $186.02 | $187.17 | $212.52 | $510.31 | $57.57 | $105.96 | $27.04 | $93.86 | $8.04 | $167.59 | $8.29 | $76.58 | $14.37 | $144.55 | $253.41 | $3.60 | $15.52 |