| Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
| Title | IT-7888AKC w/ 1/4" Composite Keyless Chuck | IT-7838D Windshield Removal Tool | IT-8859RS51 3" Rolok Pad 5/16-24 Female | IT-7581 3/16" Punch Flange | IT-7700N Heavy Duty Metal Shear | IT-7415V 5” DA Pad - 5/16-24 | IT-8705R .5 HP Router | IT-2440EX Push to Start Auto Shut Off Screwdriver | IT-7788-KC 3/8" Composite Keyless Drill Chuck | IT-8863S 1/4" Straight Impacting Screwdriver | IT-7402 70,000 RPM Pencil Grinder | IT-7601 Pistol Grip Needle Scaler | IT-7415VAC 5” DA Pad | IT-7121K Super Duty .401 Air Hammer Kit | IT-8801R 4" Reversible Angle Cutoff Tool | IT-7788HR-KCN 1/2” Keyless Drill Chuck | IT-8816 7" Angle Sander | 777828 5" Sander Backup Pad | IT-7888A1B w/ 1/4" Jacobs 1B Chuck | IT-7716 7" Angle Sander | IT-7715N 5" Angle Grinder 5/8-11 | IT-9754 Pancake Drill 1/4-28 | IT-7718 7" Vertical Sander | IT-7728 3/8" Ratchet Wrench | IT-9915ND 5" w/Dust Collector 5/8-11 Spindle | IT-7767RNA350 Rivnut Tool | IT-7718P 7" Vertical Polisher | 777827 4-1/2" Sander Backup Pad | IT-7415VV 5” DA Pad | 777826 3" Sander Backup Pads | IT-7701SS Straight Handle Scissor Shear | IT-7788S2-A 3/8” Standard Jacobs Multicraft “S2” Drill Chuck | IT-7768RAH 3/8" Angle Drill | IT-5T Long Reach Sand Rammer |
| Price | $124.39 | $8.61 | $106.53 | $97.32 | $8.61 | $118.63 | $446.95 | $11.49 | $106.53 | $135.91 | $218.85 | $20.71 | $178.53 | $187.17 | $23.01 | $342.69 | $3.60 | $139.94 | $154.92 | $144.55 | $164.71 | $67.36 | $311.01 | $510.31 | $176.23 | $3.60 | $20.71 | $2.85 | $130.72 | $11.49 | $212.52 | $737.83 | ||
| Add to cart | ||||||||||||||||||||||||||||||||||
| Description |
The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip. |
The IT-7838D comes complete with air supply hose and exhaust hose. Also provided is our IT-783851 2-1/2” offset blade. This tool is a must for every glass shop and may be used with a wide range of blades. |
IT-8859RS51 3″ Rolok Pad 5/16-24 Female |
Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees. |
5” DA Pad – 5/16-24 for the IT-7311W5, IT-7445 and IT-7785. Has velcro face for abrasives with the hook and loop system. |
Both tools are lightweight, powerful production routers. Easily adjustable. Direct drive motors have no gears to wear. Complete with lock off levers and rear exhaust. All aluminum router base. |
Manual torque adjustment – tighten or loosen internal spring |
IT-7788-KC 3/8″ Composite Keyless Drill Chuck. This chuck can be used on drills with forward and reverse. 3/8-24 thread Drill Chuck. Capacity 3/8”. |
These pistol grip screwdrivers are light and comfortable. Rear Exhaust directs air away from the operator and muffles exhaust noise. Location of reverse lever makes changing directions easy. |
The perfect tools for cleaning and polishing dies, porting and polishing engines, de-burring castings and any job where carbide burrs or stones are used for delicate material removal. The IT-7401 now comes in a storage case with oil bottle, quick disconnect fitting, IT-5830 oiler and 2 collet wrenches. |
A great tool for heavy duty scaling, the IT-7601 has a well cushioned rubber handle, heat treated piston and barrel. |
5” DA Pad for use with IT-7555VAC Spindle size 5/16-24 PSA vinyl face. |
The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks. |
(uses our IT-9801341 4” Cutoff Wheel) same great tool as the IT-8801REX, but with short reach |
IT-7788HR-KCN 1/2” Keyless Drill Chuck. Makes changing drill bits easy. This chuck can be used for for- ward and reversible drills. 3/8-24 threads. 1/2” capacity. |
The IT-8816 is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with |
Sander Backup Pads for IT-7778. |
The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip. |
This lightweight, rugged 1.0 horsepower sander is excellent for shaping and contouring patches, sanding body filler |
*.7 HP motor provides fast efficient grinding in tight spots |
The 1/4-28 Drill Motors shown here give a wide range of use for tight spots encountered in aircraft manufacturing and any type of production drilling situation. |
* Built-in regulator |
Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. |
The IT-9915 series of grinders are built for production and long life. Adjustable exhaust, Heavy duty safety lockoff lever. Use type 27 wheels (not included). |
Tool comes standard with one head, either 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, M3, M4, M5, M6 or M8. Additional heads available separately. |
Same great tool as the IT-7718 but with a lower gear ratio. RPM is 2000, the perfect polishing speed. Comes complete with a rubber backup pad, our IT-7470A and the IT-7472 Wool Polishing Pad. A great tool for buffing and polishing paint, plastic, metal and wood. |
Sander Backup Pads for IT-7778. |
5” DA Pad for use with IT-7555VAC Spindle size- 5/16-24 Velcro face. |
Sander Backup Pads for IT-7778. |
IT-7788S2-A 3/8” Standard Jacobs Multicraft “S2” Drill Chuck. 3/8-24 threads. Key is model IT-7788S2-B. Chuck and key are model IT-7788S2-C. This chuck can be used on forward and reversible drills. Capacity 3/8”. |
Designed to be used in tight areas where only an angle can reach. Compact and easy to use, the angle head can be rotated 360 degrees. |
The IT-5T Sand Rammer is a hard hitting Heavy Duty Rammer built for production use in foundries, construction sites, utility companies or wherever a Rammer is used. |
||
| Sku | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Availability | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock |
| Weight | 2.5 lbs | 2.5 lbs | .5 lbs | 1.5 lbs | 3.3 lbs | .5 lbs | 2 lbs | 2.5 lbs | .5 lbs | 2.7 lbs | 5 lbs | 6 lbs | .5 lbs | 5 lbs | 2.7 lbs | .5 lbs | 5 lbs | .5 lbs | 2.5 lbs | 5 lbs | 4.3 lbs | 2 lbs | 5.5 lbs | 2.7 lbs | 3.5 lbs | 2.5 lbs | 5.5 lbs | .5 lbs | .5 lbs | .5 lbs | 3.3 lbs | .5 lbs | 3.7 lbs | 22 lbs |
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Price | $124.39 | $8.61 | $106.53 | $97.32 | $8.61 | $118.63 | $446.95 | $11.49 | $106.53 | $135.91 | $218.85 | $20.71 | $178.53 | $187.17 | $23.01 | $342.69 | $3.60 | $139.94 | $154.92 | $144.55 | $164.71 | $67.36 | $311.01 | $510.31 | $176.23 | $3.60 | $20.71 | $2.85 | $130.72 | $11.49 | $212.52 | $737.83 |