Compare products

 
 
  Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x
IT-7700N
IT-7311
IT-2XS
IT-7739
IT-7788FK
IT-1XS
Placeholder
721128V
IT-9800
IT-7788K
Placeholder
IT-7703
IT-DA90
IT-6415V
IT-7711
Placeholder
IT-9888RSPC
IT-8857RE
IT-7838
Title IT-7700N Heavy Duty Metal Shear IT-7311SL with Safety Lever IT-2XS Straight Handle Rivet Gun IT-7739 3/8" Impact Wrench IT-7788FK 3/8" Pistol Grip Drill w/ Keyless Chuck IT-1X Straight Handle Rivet Gun IT-7211 2" Angle DA Sander IT-1XS Straight Handle Rivet Gun IT-7511 2" Angle DA Sander 751138 2" PSA DA Pad 6mm 721128V 2" Velcro DA Pad 1/4-20 IT-9800 M3-M12 Tapping Tool IT-7788K 3/8" Pistol Grip Reversible Drill IT-5540SPC 2 Speed Drill w/ 3/8" Precision Chuck IT-7703 Gasket Scraper IT-DA90 3/8" Drill Attachment IT-7714 4" Angle Grinder 3/8-24 IT-9916 7" Angle Sander IT-6415V 5” Velcro Pad IT-7711 Air Nibbler IT-7888MK 1/4" Metal Keyless Chuck IT-9888RSPC 1/4" Special Hi Precision Drill & Chuck IT-8857RE Extended 25" Die Grinder IT-7838 Heavy Duty Sealant Cutter/Scraper
Price $97.32 $84.64 $240.16 $195.81 $71.97 $211.94 $218.28 $239.59 $129.57 $8.04 $8.04 $517.80 $74.85 $176.23 $56.42 $50.08 $144.55 $280.48 $8.29 $105.96 $148.00 $132.45 $249.38 $250.53
Add to cart
Description

Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees.

(specify 5″ or 6″ pad)

IT-7311/IT-7311W5

*Built-in Regulator
*1/2 HP motor
*Full ball bearing construction
*Built-in silencer
*Balanced counter weight design
*Locking shaft for easy pad removal
*Available with Velcro pad (specify when ordering)
*3/8” Orbit

Straight Handle Rivet Gun, .401 Shank Rivet Gun.

Comfortable grip and trigger, the T-7739 is a reliable 3/8” impact for production. Twin hammer clutch is powerful and long lasting. Built-in regulator.

•Quality hardened gears
•Rear Exhaust
•Variable Speed
•Lightweight aluminum handle

Straight Handle Rivet Gun, .401 Shank Rivet Gun.

*Regulator
*Full ball bearing construction *Built-in silencer
* 1/8” Orbit

Our best 2” DA Sander for getting in hard to reach spots where finish work is needed.

Straight Handle Rivet Gun, .401 Shank Rivet Gun.

A great finishing sander. Smooth and quiet, yet has a fast cutting action.

*Rear Exhaust
*Full ball bearing construction
*Designed for small finishing jobs

Spare pads for the IT-7211 & IT-7511.

Spare pads for the IT-7211 & IT-7511.

Tapping Capacity-Aluminum: M3-M12
Tapping Capacity-Steel: M3-M8
Free Speed: 150 RPM
Length: 7.87″
Weight: 4.10 lbs.
Air Pressure: 90 PSI Max.

The IT-7788R and IT-7788K are great for those tough jobs that need extra power. Excellent tool for honing, reaming, wire brushing, hole sawing, and heavy duty drilling. Plus they are reversing.

The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options.

The perfect tool for removal of dried out gasket material.
The IT-7703 will not harm underlying surface when using at the correct angle.

*3/8” Jacobs Chuck
*Requires only 4” Clearance
*One to one gear ratio
*Not for use with bits larger than 3/8”

*.7 HP motor provides fast efficient grinding in tight spots
*Hardened spiral bevel gears in angle head for long life and low vibration
*Lock off lever standard
*Uses type 27 grinding wheels (not included)
*Built-in governor prevents overspeed

This lightweight, rugged 1.3 horsepower sander is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with a plastic backup pad. Auxillary plastic handle rotates for left or right handed use, or straight up!

IT-6415V 5” Velcro Pad

*Teasing Throttle
*1/2 HP motor provides power through hardened planetary gear system
*Cutting head adjustable 360 degrees in 90 degree increments

The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options.

The IT-9888R is a quality 1/4” drill with the same teasing throttle control as above and a convenient reversing lever. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4”Composite Keyless chuck as IT-9888RK and with 1/4” Hi-Precision Geared chuck as IT-9888RSPC.

The IT-8857RE is a Heavy Duty Extended Die Grinder. Its length of 25 inches gets you into really tight spots and the .9 horsepower motor provides all the power you need. The collet provides maximum gripping strength because both ends of the collet are slotted.

A must for every glass shop. Cuts incapsulated glass with ease. Also works great for cutting material out of expansion joints. Sharp blades and cutting action of this tool make for an excellent caulking and putty scraper – even cuts wood. Double head bearings for trouble free service.

Sku - - - - - - - - - - - - - - - - - - - - - - - -
Availability In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock
Weight 3.3 lbs 4.5 lbs 2.5 lbs 3.7 lbs 2.3 lbs 2.5 lbs 1.7 lbs 2.5 lbs 1.5 lbs .5 lbs .5 lbs 4.5 lbs 2.3 lbs 3 lbs 2.3 lbs .5 lbs 4.3 lbs 5 lbs .5 lbs 2.5 lbs 2.5 lbs 1.7 lbs 1.5 lbs 3 lbs
Dimensions N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Price $97.32 $84.64 $240.16 $195.81 $71.97 $211.94 $218.28 $239.59 $129.57 $8.04 $8.04 $517.80 $74.85 $176.23 $56.42 $50.08 $144.55 $280.48 $8.29 $105.96 $148.00 $132.45 $249.38 $250.53