| Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
|
 |
 |
 |
 |
|
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
|
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
| Title | IT-7007N Spray Gun & No Drip Cup | IT-9888RSPC 1/4" Special Hi Precision Drill & Chuck | IT-7788N 3/8" Pistol Grip Drill | IT-9750EX 90 Degree Extended Aircraft Drill | IT-7454HPR .75HP Heavy Duty 3/8" Reversible Drill | IT-9888-A 1/4" Special Precision Drill Chuck | IT-2005 One Shot Hammer | IT-7780 Palm Grip Nail Driver | IT-7700N Heavy Duty Metal Shear | IT-7838B Windshield Removal Tool | IT-7768RAH 3/8" Angle Drill | IT-7768HRK 1/2" Reversible Drill w/ Keyless Chuck | IT-5540SPC 2 Speed Drill w/ 3/8" Precision Chuck | IT-7788-A 3/8” Standard Jacobs Multicraft Drill Chuck | 755344 3-1/2” Polishing Pad | IT-78881B 1/4" Jacobs 1B Chuck | IT-7788S2-A 3/8” Standard Jacobs Multicraft “S2” Drill Chuck | IT-8816 7" Angle Sander | IT-7472 7 1/2" Wool Polishing Pad | IT-7701SS Straight Handle Scissor Shear | IT-8839 3/8" Impact Wrench | IT-7716P 7" Angle Polisher | IT-5710 Brass Multi Position Regulator 1/4” NPT | IT-7729 1/2" Ratchet Wrench | IT-7581 3/16" Punch Flange | IT-7020A 3/4" x 20-1/2" Belt Sander | IT-9555B 5" Super Duty DA Sander 3/32" Orbit | IT-7415VAC 5” DA Pad | IT-2440EX Push to Start Auto Shut Off Screwdriver | 777828 5" Sander Backup Pad | IT-9888SPC 1/4" Special Hi Precision Drill & Chuck | IT-9890 5/16-24 Threaded Collet Aircraft Drill Motor & 1/4" Collet | IT-7888A1B w/ 1/4" Jacobs 1B Chuck | IT-7311SL with Safety Lever | IT-9988HRS34-A 3/4" Drill Chuck w/ taper | IT-2X Straight Handle Rivet Gun | IT-9800 M3-M12 Tapping Tool | IT-7888AKC w/ 1/4" Composite Keyless Chuck | IT-7469R 1/8" 45 Degree Angle Pencil Grinder 23,500 RPM | IT-7121 Super Duty .401 Air Hammer | IT-8857RE Extended 25" Die Grinder | IT-7718 7" Vertical Sander | IT-7764EX 1/4" Externally Adjustable Clutch Screwdriver | IT-8859RS50 Pad Adapter 1/4-20 x 5/16-24 | IT-9407S 7" Vertical Sander | IT-8863S 1/4" Straight Impacting Screwdriver | IT-7010AN 3/8" x 13" Belt Sander | IT-7002A Low Speed Tire Buffer | IT-7705 Heavy Duty Reciprocating File |
| Price | $100.77 | $132.45 | $68.52 | $118.05 | $21.28 | $361.12 | $161.83 | $97.32 | $190.05 | $212.52 | $201.00 | $176.23 | $11.49 | $11.49 | $141.09 | $11.49 | $342.69 | $13.80 | $130.72 | $243.62 | $171.62 | $10.08 | $67.36 | $106.53 | $230.37 | $205.03 | $20.71 | $446.95 | $3.60 | $126.69 | $460.77 | $139.94 | $84.64 | $216.55 | $517.80 | $124.39 | $224.04 | $113.44 | $249.38 | $164.71 | $299.49 | $4.00 | $650.85 | $106.53 | $139.94 | $78.31 | $130.72 | ||
| Add to cart | |||||||||||||||||||||||||||||||||||||||||||||||||
| Description |
The IT-9888R is a quality 1/4” drill with the same teasing throttle control as above and a convenient reversing lever. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4”Composite Keyless chuck as IT-9888RK and with 1/4” Hi-Precision Geared chuck as IT-9888RSPC. |
•Quality hardened gears |
The 1/4-28 Drill Motors shown here give a wide range of use for tight spots encountered in aircraft manufacturing and any type of production drilling situation. |
*Teasing throttle |
IT-9888-A 1/4” Special Precision Drill Chuck. Machined gear. 3/8-24 threads. Key is model IT-9888-B. Chuck and key are model IT-9888-C. This chuck can be used on forward and reversible drills. Capacity 0 to 1/4”. |
Our One Shot hammers are designed for operations requiring less power, including driving oil seals, bushings and pins. Every pull of the lever delivers a single blow that can be regulated by adjusting the air pressure. |
*Operates in any position |
Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees. |
A must for every glass shop. Our IT-7838B is a quality tool at an affordable price. |
Designed to be used in tight areas where only an angle can reach. Compact and easy to use, the angle head can be rotated 360 degrees. |
The IT-7768HR and IT-7768HRK have convenient forward and reverse lever, rear exhaust and all ball bearing construction. |
The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options. |
IT-7788-A 3/8” Standard Jacobs Multicraft Drill Chuck. 3/8-24 threads. Key is model IT-7788-B. Chuck and key are model IT-7788-C. This chuck can be used on forward and reversible drills. Capacity 3/8″ |
3-1/2” Polishing Pad for the IT-7553. For use with 755338V velcro pad. |
The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options. |
IT-7788S2-A 3/8” Standard Jacobs Multicraft “S2” Drill Chuck. 3/8-24 threads. Key is model IT-7788S2-B. Chuck and key are model IT-7788S2-C. This chuck can be used on forward and reversible drills. Capacity 3/8”. |
The IT-8816 is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with |
7 1/2″ Wool Polishing Pad |
Compact, lightweight and hard hitting. The IT-8839 and IT-8839A have composite housings that are ideal for your toughest job. Twin hammer clutches have lots of power. Tool exausts through the bottom of the handle. Built-in regulator. |
The IT-7716P Same great tool as the IT-7716 but with a lower gear ratio. RPM is 2500, the perfect polishing speed. Comes complete with a rubber backup pad (our IT-7470A) and the IT-7472 Wool Polishing Pad. |
IT-5710 Brass Multi Position Regulator 1/4” NPT |
Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. |
Lightweight Belt Sander is built for heavy use. |
The IT-9555 & IT-9556 sanders are our smoothest running DA Sanders. Metal rotors and fiberglass pads help to improve cutting action and durability. |
5” DA Pad for use with IT-7555VAC Spindle size 5/16-24 PSA vinyl face. |
Manual torque adjustment – tighten or loosen internal spring |
Sander Backup Pads for IT-7778. |
Non-reversible, The IT-9888 is a quality 1/4” drill with the teasing throttle control you need. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4” Composite Keyless chuck as IT-9888K, with 1/4” Metal Keyless chuck as IT-9888MK and with 1/4” Hi-Precision Geared chuck as IT-9888SPC. |
The IT-9870 & IT-9890 give added versatility with their 1/4” collets and threaded collets for 1/4-28 on the IT-9870 and 5/16-24 on the IT-9890. Quality one piece angle heads and unique lock off levers make these tools long lasting and comfortable to use. |
The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip. |
(specify 5″ or 6″ pad) IT-7311/IT-7311W5 *Built-in Regulator |
3/4” Drill Chuck with TAPERED MOUNT fits IT-9988HRS DRILL. Key is IT-9988HRS34-B, Chuck and key is IT-9988HRS34-C. |
Straight Handle Rivet Gun, .401 Shank Rivet Gun. |
Tapping Capacity-Aluminum: M3-M12 |
The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip. |
The perfect tools for cleaning and polishing dies, porting and polishing engines, de-burring castings and any job where carbide burrs or stones are used for delicate material removal. |
The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks. |
The IT-8857RE is a Heavy Duty Extended Die Grinder. Its length of 25 inches gets you into really tight spots and the .9 horsepower motor provides all the power you need. The collet provides maximum gripping strength because both ends of the collet are slotted. |
* Built-in regulator |
These pistol grip screwdrivers are light and comfortable. Rear Exhaust directs air away from the operator and muffles exhaust noise. Location of reverse lever makes changing directions easy. |
IT-8859RS50 Pad Adapter 1/4-20 x 5/16-24 |
The IT-9407S is a 2 HP sander that comes complete with a T-7470A 7” rubber pad and pad nut. This is the same great tool as the IT-9407 grinder, but without a guard. IT-9407S has a governor to prevent over speeding as well as a heavy duty lock off lever to help prevent accidental starts. |
These pistol grip screwdrivers are light and comfortable. Rear Exhaust directs air away from the operator and muffles exhaust noise. Location of reverse lever makes changing directions easy. |
Rugged and dependable |
*Built in regulator |
Built for production, the IT-7705 comes complete with round, flat, triangular and bastard files. |
|||
| Sku | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Availability | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock |
| Weight | 1.5 lbs | 1.7 lbs | 2.3 lbs | 2 lbs | 3.3 lbs | .5 lbs | 3 lbs | 2.7 lbs | 3.3 lbs | 2.5 lbs | 3.7 lbs | 3.7 lbs | 3 lbs | .5 lbs | .5 lbs | 2.5 lbs | .5 lbs | 5 lbs | .5 lbs | 3.3 lbs | 3 lbs | 5 lbs | .5 lbs | 2.7 lbs | 1.5 lbs | 3.4 lbs | 2.5 lbs | .5 lbs | 2.5 lbs | .5 lbs | 1.7 lbs | 2.4 lbs | 2.5 lbs | 4.5 lbs | .5 lbs | 2.5 lbs | 4.5 lbs | 2.5 lbs | 4 lbs | 4 lbs | 1.5 lbs | 5.5 lbs | 3.5 lbs | .5 lbs | 8 lbs | 2.7 lbs | 2 lbs | 2 lbs | 3 lbs |
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Price | $100.77 | $132.45 | $68.52 | $118.05 | $21.28 | $361.12 | $161.83 | $97.32 | $190.05 | $212.52 | $201.00 | $176.23 | $11.49 | $11.49 | $141.09 | $11.49 | $342.69 | $13.80 | $130.72 | $243.62 | $171.62 | $10.08 | $67.36 | $106.53 | $230.37 | $205.03 | $20.71 | $446.95 | $3.60 | $126.69 | $460.77 | $139.94 | $84.64 | $216.55 | $517.80 | $124.39 | $224.04 | $113.44 | $249.38 | $164.71 | $299.49 | $4.00 | $650.85 | $106.53 | $139.94 | $78.31 | $130.72 |