| Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | Remove x | |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
| Title | IT-7768 Super Duty 3/8" Non Reversible Drill | IT-7788N 3/8" Pistol Grip Drill | IT-7765 Jitterbug Sander 3-2/3" x 9" | IT-7716W 7" WET Angle Sander | IT-7888-SPA 1/4” Special Jacobs 1BA Drill Chuck | IT-7701 Heavy Duty Metal Shear | 777827 4-1/2" Sander Backup Pad | IT-7700SS Pistol Grip Scissor Shear | IT-7415V 5” DA Pad - 5/16-24 | IT-9920 3/8" Butterfly Impact | IT-7888-A 1/4" Drill Chuck Jacobs Multicraft | IT-9988HRS34-A 3/4" Drill Chuck w/ taper | IT-7445 SL DA Sander w/ safety lever | IT-7838 Heavy Duty Sealant Cutter/Scraper | IT-7763 1/4" Screwdriver | IT-7415 5” DA Pad - 5/16-24 | IT-9888-A 1/4" Special Precision Drill Chuck | IT-7888 w/ 1/4" Standard Chuck | IT-8758R 1/4" Rear Exhaust Die Grinder | IT-7311SL with Safety Lever | IT-7553 3" Mini Palm Grip DA Sander 3/32" Orbit | IT-9915 5" Guard 3/8-24 | 755338V 3” DA Pad | IT-7012A 1/2" x 24" Belt Sander | IT-9750 90 Degree Aircraft Drill | IT-7788HRK 1/2" Pistol Grip Reversible Drill w/ Keyless Chuck | IT-7788HR 1/2" Pistol Grip Reversible Drill | IT-7007N Spray Gun & No Drip Cup | IT-7701SS Straight Handle Scissor Shear | IT-7020 3/4" x 20 1/2" Belt Sander | IT-8825 1/4" Ratchet Wrench | 751138V 2" Velcro DA Pad 6mm | IT-7768HR 1/2" Reversible Drill 800 RPM | IT-7826 3/8" Ratchet Wrench | IT-9750EX 90 Degree Extended Aircraft Drill | IT-7665 Detail Triangular Mini Jitterbug Sander | IT-7402 70,000 RPM Pencil Grinder | IT-9555 5" Super Duty DA Sander 3/16" Orbit | IT-7469R 1/8" 45 Degree Angle Pencil Grinder 23,500 RPM | IT-7786 6" DA Sander w/ 9/32" Orbit | IT-7788R 3/8" Pistol Grip Reversible Drill | IT-5540SPC 2 Speed Drill w/ 3/8" Precision Chuck | 751138V 2” DA Pad | IT-9888-MKC 1/4” Metal Keyless Drill Chuck | IT-6922R Regulated Hose Swivel 1/4" NPT | IT-7768HRK 1/2" Reversible Drill w/ Keyless Chuck | IT-881645V 5" Velcro Poly Pad 5/8-11 | IT-7761AH 1/4" Right Angle Screwdriver | IT-9751 45 Degree Aircraft Drill | IT-7002A Low Speed Tire Buffer | IT-5X Straight Handle Rivet Gun | IT-9870 1/4-28 Aircraft Drill Motor & 1/4" Collet | IT-7581 3/16" Punch Flange |
| Price | $149.73 | $68.52 | $82.34 | $249.38 | $32.80 | $99.62 | $3.60 | $130.72 | $8.61 | $109.41 | $10.92 | $143.40 | $250.53 | $149.73 | $8.61 | $21.28 | $111.14 | $56.42 | $84.64 | $176.80 | $245.92 | $14.37 | $187.17 | $143.97 | $124.39 | $100.77 | $130.72 | $362.28 | $93.86 | $8.04 | $168.74 | $93.86 | $178.53 | $135.91 | $205.03 | $224.04 | $161.83 | $74.85 | $176.23 | $8.04 | $28.77 | $7.65 | $201.00 | $15.52 | $300.07 | $78.31 | $374.37 | $460.77 | $106.53 | ||||
| Add to cart | |||||||||||||||||||||||||||||||||||||||||||||||||||||
| Description |
Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only. |
•Quality hardened gears |
*Positive lock clips hold paper in place Used for wet or dry sanding. Great for fiberglass, plastic, steel, aluminum, or wood. A must for every body shop and woodworking shop. |
*All ball bearing construction |
IT-7888-SPA 1/4” Special Jacobs 1BA Drill Chuck. 3/8-24 threads. Key is model IT-7888-SPB. Chuck and key are model IT-7888- SPC. This chuck can be used on forward and reversible drills. Capacity 0 to 1/4”. |
Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees. |
Sander Backup Pads for IT-7778. |
5” DA Pad – 5/16-24 for the IT-7311W5, IT-7445 and IT-7785. Has velcro face for abrasives with the hook and loop system. |
Small, lightweight and comfortable, the IT-7720N 3/8” Butterfly and the IT-9920 3/8” Butterfly Impacts are great for all types of assembly operations involving small fasteners. Excellent for transmission and body shops and all general mechanical work including production assembly. Both tools feature a 360 degree swivel regulator. Their compact size lets you reach the tightest areas. |
IT-7888-A 1/4” Drill Chuck Jacobs Multicraft Standard Drill Chuck. 3/8-24 threads. Key is model IT-7788-B(fits IT-7888-A & IT-7788-A chucks). Chuck and key are model IT-7888-C. This chuck can be used on forward and reversible drills. Capacity 0 to 1/4”. |
3/4” Drill Chuck with TAPERED MOUNT fits IT-9988HRS DRILL. Key is IT-9988HRS34-B, Chuck and key is IT-9988HRS34-C. |
The IT-7445/IT-7446 have a smaller grip to better fit smaller hands. They both come with regulators and muffled exhaust. |
A must for every glass shop. Cuts incapsulated glass with ease. Also works great for cutting material out of expansion joints. Sharp blades and cutting action of this tool make for an excellent caulking and putty scraper – even cuts wood. Double head bearings for trouble free service. |
These pistol grip screwdrivers are light and comfortable. Rear exhaust directs air away from the operator and muffles the exhaust noise. Location of reverse lever makes changing directions easy. |
5” DA Pad – 5/16-24 |
IT-9888-A 1/4” Special Precision Drill Chuck. Machined gear. 3/8-24 threads. Key is model IT-9888-B. Chuck and key are model IT-9888-C. This chuck can be used on forward and reversible drills. Capacity 0 to 1/4”. |
The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options. |
The IT-8758R and IT-8759R are the .35 HP version of the IT-8859R. With plenty of power and their smaller size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool. |
(specify 5″ or 6″ pad) IT-7311/IT-7311W5 *Built-in Regulator |
The IT-7553 is small, compact and easy to use. It features heavy-duty ball bearing construction, built-in regulator and a smooth powerful cutting action. The 3” velcro pad makes for easy attachment of sanding disks. The 3/32” Orbit gives a fine finish for the most demanding work. |
The IT-9915 series of grinders are built for production and long life. Adjustable exhaust, Heavy duty safety lockoff lever. Use type 27 wheels (not included). |
3” DA Pad 5/16-24 for the IT-7553. Velcro Face. |
Lightweight Belt Sander is built for heavy duty use. |
The 1/4-28 Drill Motors shown here give a wide range of use for tight spots encountered in aircraft manufacturing and any type of production drilling situation. |
A great 1/2” production drill with HiTorque Double reduction gears. |
A great 1/2” production drill with HiTorque Double reduction gears. |
Lightweight Belt Sander is built for heavy duty use. Exhaust muffler keeps dBA’s in the low 80’s. Long reach makes tough jobs accessible. |
Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. Use an air blow gun to clean the head after extended use. |
Spare pads for the IT-7211 & IT-7511. |
The IT-7768HR and IT-7768HRK have convenient forward and reverse lever, rear exhaust and all ball bearing construction. |
Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. Use an air blow gun to clean the head after extended use. |
The 1/4-28 Drill Motors shown here give a wide range of use for tight spots encountered in aircraft manufacturing and any type of production drilling situation. |
The IT-7665 is small, compact and easy to use. It features heavy-duty ball bearing construction, built-in regulator and a smooth powerful cutting action. The vinyl face pad makes for easy attachment of PSA sandpaper. Pad size is 90 x 90 x 80mm. Triangular Pad allows use in corners and tight spots. The 1/8” Orbit gives a fine finish and heavy cutting action for the most demanding work. Can be used for sanding, polishing and scrubbing. |
The perfect tools for cleaning and polishing dies, porting and polishing engines, de-burring castings and any job where carbide burrs or stones are used for delicate material removal. The IT-7401 now comes in a storage case with oil bottle, quick disconnect fitting, IT-5830 oiler and 2 collet wrenches. |
The IT-9555 & IT-9556 sanders are our smoothest running DA Sanders. Metal rotors and fiberglass pads help to improve cutting action and durability. |
The perfect tools for cleaning and polishing dies, porting and polishing engines, de-burring castings and any job where carbide burrs or stones are used for delicate material removal. |
Smooth, quiet and reliable, the IT-7786 & IT-7785 have a fast cutting action with the least amount of vibration possible. Exhaust is through the handle and blows toward the air hose, not on your work. |
The IT-7788R and IT-7788K are great for those tough jobs that need extra power. Excellent tool for honing, reaming, wire brushing, hole sawing, and heavy duty drilling. Plus they are reversing. |
The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options. |
2” DA Pads for the IT-7511 Velcro 6mm thread. |
IT-9888-MKC 1/4” Metal Keyless Drill Chuck. Heavy Duty metal chuck stands up to the heaviest use. 3/8-24 threads. This chuck can be used on forward direction drills only. |
IT-6922R Regulated Hose Swivel 1/4″ NPT |
The IT-7768HR and IT-7768HRK have convenient forward and reverse lever, rear exhaust and all ball bearing construction. |
5″ Velcro Poly Pad 5/8-11 for IT-8818P |
The IT-7761 & IT-7761AH are reversible and produce accurate torque. The clutches are internally adjustable and feature rear exhaust. |
The 1/4-28 Drill Motors shown here give a wide range of use for tight spots encountered in aircraft manufacturing and any type of production drilling situation. |
*Built in regulator |
Straight Handle Rivet Gun, .498 Shank Rivet Gun. |
The IT-9870 & IT-9890 give added versatility with their 1/4” collets and threaded collets for 1/4-28 on the IT-9870 and 5/16-24 on the IT-9890. Quality one piece angle heads and unique lock off levers make these tools long lasting and comfortable to use. |
||||
| Sku | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Availability | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock | In stock |
| Weight | 3.7 lbs | 2.3 lbs | 5 lbs | 5 lbs | .5 lbs | 3.3 lbs | .5 lbs | 3.4 lbs | .5 lbs | 2.6 lbs | .5 lbs | .5 lbs | 2.4 lbs | 3 lbs | 2.7 lbs | .5 lbs | .5 lbs | 2.5 lbs | 1.5 lbs | 4.5 lbs | 2.7 lbs | 3.5 lbs | .5 lbs | 2.3 lbs | 2 lbs | 3.7 lbs | 3.7 lbs | 1.5 lbs | 3.3 lbs | 3.4 lbs | 1.3 lbs | .5 lbs | 3.7 lbs | 1.3 lbs | 2 lbs | 1.8 lbs | 5 lbs | 2.5 lbs | 4 lbs | 3.5 lbs | 2.3 lbs | 3 lbs | .5 lbs | .5 lbs | .5 lbs | 3.7 lbs | .5 lbs | 2 lbs | 2 lbs | 2 lbs | 5.5 lbs | 2.5 lbs | 1.5 lbs |
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Price | $149.73 | $68.52 | $82.34 | $249.38 | $32.80 | $99.62 | $3.60 | $130.72 | $8.61 | $109.41 | $10.92 | $143.40 | $250.53 | $149.73 | $8.61 | $21.28 | $111.14 | $56.42 | $84.64 | $176.80 | $245.92 | $14.37 | $187.17 | $143.97 | $124.39 | $100.77 | $130.72 | $362.28 | $93.86 | $8.04 | $168.74 | $93.86 | $178.53 | $135.91 | $205.03 | $224.04 | $161.83 | $74.85 | $176.23 | $8.04 | $28.77 | $7.65 | $201.00 | $15.52 | $300.07 | $78.31 | $374.37 | $460.77 | $106.53 |