Compare products

 
 
  Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x
IT-7415VAC
IT-6416VV
IT-7007N
IT-5T
IT-9888SPC
Placeholder
IT-7767RNA350
Placeholder
IT-7761AH
IT-7768RAH
IT-5540K
IT-7700SS
IT-7151C
Placeholder
IT-7888P
IT-7720N
777827
Placeholder
IT-7701
IT-7445
755546
IT-7888-SPA
IT-7415
7888P50V
8818P11
Placeholder
IT-7888P
IT-9751
IT-7581
IT-7768
IT-7030
IT-7580
Placeholder
IT-9988HD
IT-7700N
IT-7768HRK
IT-7788HRK
IT-7788R
IT-7788HR
IT-7121K
IT-7768R
IT-7010
721128
IT-7616
IT-7788FK
Title IT-7415VAC 5” DA Pad IT-6416VV Velcro Vacuum Pad IT-7007N Spray Gun & No Drip Cup IT-5T Long Reach Sand Rammer IT-9888SPC 1/4" Special Hi Precision Drill & Chuck 751138 2" PSA DA Pad 6mm IT-8758R 1/4" Rear Exhaust Die Grinder IT-7716W 7" WET Angle Sander IT-7767RNA350 Rivnut Tool 751138V 2" Velcro DA Pad 6mm IT-7761AH 1/4" Right Angle Screwdriver IT-7768RAH 3/8" Angle Drill IT-5540K 2 Speed Drill w/ 3/8" Keyless Chuck IT-7700SS Pistol Grip Scissor Shear IT-7718 7" Vertical Sander IT-7151C Super Duty .401 Air Hammer with Needle Scaler IT-7470A 7” Rubber Back Up Pad IT-7888A1B w/ 1/4" Jacobs 1B Chuck IT-8802A Heavy Duty Reciprocating Saw IT-7720N 3/8" Butterfly Impact 777827 4-1/2" Sander Backup Pad IT-9988HRS34-A 3/4" Drill Chuck w/ taper IT-7701 Heavy Duty Metal Shear IT-7445 SL DA Sander w/ safety lever 755546 6” DA Pad IT-7888-SPA 1/4” Special Jacobs 1BA Drill Chuck IT-7415 5” DA Pad - 5/16-24 7888P50V 3" Velcro Pad 5/16-24 8818P11 Adapter for T-8818P IT-7730 1/2" Ratchet Wrench IT-5540SPC 2 Speed Drill w/ 3/8" Precision Chuck IT-7888 w/ 1/4" Standard Chuck IT-9751 45 Degree Aircraft Drill IT-7581 3/16" Punch Flange IT-7768 Super Duty 3/8" Non Reversible Drill IT-7030 1-3/16" x 21-1/4" Belt Sander IT-7580 5/16" Punch Flange IT-7729 1/2" Ratchet Wrench IT-9988HD 1/2" Hammer Drill IT-7700N Heavy Duty Metal Shear IT-7768HRK 1/2" Reversible Drill w/ Keyless Chuck IT-7716 7" Angle Sander IT-7788HRK 1/2" Pistol Grip Reversible Drill w/ Keyless Chuck IT-7788R 3/8" Pistol Grip Reversible Drill IT-7446 6" DA Sander 3/16" Orbit IT-7788HR 1/2" Pistol Grip Reversible Drill IT-7121K Super Duty .401 Air Hammer Kit IT-7768R Super Duty 3/8" Reversible Drill IT-7010 3/8" x 13" Belt Sander 721128 2" PSA DA Pad 1/4-20 IT-7616 Air Scribe (carbide tip) IT-7716DS 4500 RPM Drum Sander IT-7788FK 3/8" Pistol Grip Drill w/ Keyless Chuck
Price $20.71 $8.29 $100.77 $737.83 $126.69 $8.04 $56.42 $249.38 $510.31 $8.04 $300.07 $212.52 $168.74 $130.72 $164.71 $130.15 $22.44 $139.94 $907.75 $76.58 $3.60   $99.62 $143.40 $15.52 $32.80 $8.61 $14.37 $12.64 $167.59 $176.23 $111.14   $106.53 $149.73 $569.64 $134.18 $67.36 $244.77 $97.32 $201.00 $154.92 $143.97 $74.85 $129.57 $124.39 $178.53 $149.73 $237.86 $8.04 $139.94 $255.14 $71.97
Add to cart
Description

5” DA Pad for use with IT-7555VAC Spindle size 5/16-24 PSA vinyl face.

IT-6416VV Velcro Vacuum Pad

 

The IT-5T Sand Rammer is a hard hitting Heavy Duty Rammer built for production use in foundries, construction sites, utility companies or wherever a Rammer is used.

Non-reversible, The IT-9888 is a quality 1/4” drill with the teasing throttle control you need. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4” Composite Keyless chuck as IT-9888K, with 1/4” Metal Keyless chuck as IT-9888MK and with 1/4” Hi-Precision Geared chuck as IT-9888SPC.

Spare pads for the IT-7211 & IT-7511.

The IT-8758R and IT-8759R are the .35 HP version of the IT-8859R. With plenty of power and their smaller size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool.

*All ball bearing construction
*Side handle for right or left operation
*Built-in regulator
*Hardened and ground spiral bevel gears
*Adjustable water feed through the spindle

Tool comes standard with one head, either 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, M3, M4, M5, M6 or M8. Additional heads available separately.

Spare pads for the IT-7211 & IT-7511.

The IT-7761 & IT-7761AH are reversible and produce accurate torque. The clutches are internally adjustable and feature rear exhaust.

Designed to be used in tight areas where only an angle can reach. Compact and easy to use, the angle head can be rotated 360 degrees.

The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options.

 

* Built-in regulator
* Ball bearing construction
* Lightweight aluminum housing
* Exhausts through handle
* Rugged 1 HP motor

Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The IT-7151 has a longer stroke and heavier piston. The IT-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting.

7” Rubber Back Up Pad for the IT-7716, IT-7718, IT-8816/P type tools. 5/8-11 Female thread 6600 RPM Max. Also available IT-7471B Medium Flex rated 8600 RPM.

The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip.

The IT-8802A has variable speed, uses standard sawsall blades and has double pistons that produce plenty of power. Stroke length gives added blade life. Designed for heavy duty use in ship yards, factories, refineries for manufacturing and repair applications.

Small, lightweight and comfortable, the IT-7720N 3/8” Butterfly and the IT-9920 3/8” Butterfly Impacts are great for all types of assembly operations involving small fasteners. Excellent for transmission and body shops and all general mechanical work including production assembly. Both tools feature a 360 degree swivel regulator. Their compact size lets you reach the tightest areas.

Sander Backup Pads for IT-7778.

3/4” Drill Chuck with TAPERED MOUNT fits IT-9988HRS DRILL. Key is IT-9988HRS34-B, Chuck and key is IT-9988HRS34-C.

Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees.

The IT-7445/IT-7446 have a smaller grip to better fit smaller hands. They both come with regulators and muffled exhaust.

6” DA Pad – 5/16-24 for the IT-7556, IT-9556, IT-7311, IT-7446 and IT-7786.
Thin pad for use with PSA abrasives.

IT-7888-SPA 1/4” Special Jacobs 1BA Drill Chuck. 3/8-24 threads. Key is model IT-7888-SPB. Chuck and key are model IT-7888- SPC. This chuck can be used on forward and reversible drills. Capacity 0 to 1/4”.

5” DA Pad – 5/16-24
for the IT-7311W5, IT-7445 and IT-7785. PSA – Has vinyl face for pressure sensitive adhesive abrasives.

7888P50V 3″ Velcro Pad 5/16-24

Adapter has male thread 5/8-11.

*Teasing throttle
*Ball type socket retainer *Triple idler gear system *Light, easy to grip aluminum handle
*3/4 HP motor

This high torque ratchet handles those tough fasteners in tight places.

The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options.

The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options.

The 1/4-28 Drill Motors shown here give a wide range of use for tight spots encountered in aircraft manufacturing and any type of production drilling situation.

 

Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only.

Lightweight Belt Sander is built for heavy use. Exhaust muffler keeps dBA’s in the low 80’s. Works well in corners and on irregular shapes.

 

Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure.

The IT-9988HD is small, compact, lightweight and strong. This tool easily drills 1/2” holes in concrete. Comes with cushioned grip, side handle and 1/2” drill chuck.

Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees.

The IT-7768HR and IT-7768HRK have convenient forward and reverse lever, rear exhaust and all ball bearing construction.

This lightweight, rugged 1.0 horsepower sander is excellent for shaping and contouring patches, sanding body filler
and for heavy rust removal. Comes complete with a rubber backup pad – (our IT-7470A).

A great 1/2” production drill with HiTorque Double reduction gears.

The IT-7788R and IT-7788K are great for those tough jobs that need extra power. Excellent tool for honing, reaming, wire brushing, hole sawing, and heavy duty drilling. Plus they are reversing.

The IT-7445/IT-7446 have a smaller grip to better fit smaller hands. They both come with regulators and muffled exhaust.

A great 1/2” production drill with HiTorque Double reduction gears.

The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks.

Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only.

Lightweight Belt Sander is built for heavy use. Exhaust muffler keeps dBA’s in the low 80’s.

Spare pads for the IT-7211 & IT-7511.

*Lightweight
*Marks on materials up to 64R in hardness
*Trouble free piston design
*Low air consumption
*Twist throttle

These lightweight sander/polishers are excellant for producing a uniform surface finish without leaving shadows or transition lines. The perfect tools for cleaning welds, roughing, deburring, glazing, brushing, blending, graining, polishing and finishing.

•Quality hardened gears
•Rear Exhaust
•Variable Speed
•Lightweight aluminum handle

Sku - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Availability In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock
Weight .5 lbs .5 lbs 1.5 lbs 22 lbs 1.7 lbs .5 lbs 1.5 lbs 5 lbs 2.5 lbs .5 lbs 2 lbs 3.7 lbs 3 lbs 3.4 lbs 5.5 lbs 5 lbs .5 lbs 2.5 lbs 6.5 lbs 2.3 lbs .5 lbs .5 lbs 3.3 lbs 2.4 lbs .5 lbs .5 lbs .5 lbs .5 lbs .5 lbs 4.5 lbs 3 lbs 2.5 lbs 2 lbs 1.5 lbs 3.7 lbs 5 lbs 1.5 lbs 2.7 lbs 4.5 lbs 3.3 lbs 3.7 lbs 5 lbs 3.7 lbs 2.3 lbs 2.4 lbs 3.7 lbs 5 lbs 3.7 lbs 2 lbs .5 lbs 1 lbs 4 lbs 2.3 lbs
Dimensions N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Price $20.71 $8.29 $100.77 $737.83 $126.69 $8.04 $56.42 $249.38 $510.31 $8.04 $300.07 $212.52 $168.74 $130.72 $164.71 $130.15 $22.44 $139.94 $907.75 $76.58 $3.60 $99.62 $143.40 $15.52 $32.80 $8.61 $14.37 $12.64 $167.59 $176.23 $111.14 $106.53 $149.73 $569.64 $134.18 $67.36 $244.77 $97.32 $201.00 $154.92 $143.97 $74.85 $129.57 $124.39 $178.53 $149.73 $237.86 $8.04 $139.94 $255.14 $71.97