Compare products

IT-5711 Brass Regulator 1/4″ NPT

The IT-8816 is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with
a foam 7” Velcro Pad – (IT-881647V). Sanders come with blue grip and run at 5500 RPM. Polishers have a red grip and are 2500 RPM. The IT-8816 & IT-8816P have all the bells and whistles – Rear exhaust – lock off levers – cushion grips – foam pads – low noise – grease fitting in head.

(uses our IT-9801341 4” Cutoff Wheel) same great tool as the IT-8801REX, but with short reach

A great finishing sander. Smooth and quiet, yet has a fast cutting action.

*Rear Exhaust
*Full ball bearing construction
*Designed for small finishing jobs

The IT-9870 & IT-9890 give added versatility with their 1/4” collets and threaded collets for 1/4-28 on the IT-9870 and 5/16-24 on the IT-9890. Quality one piece angle heads and unique lock off levers make these tools long lasting and comfortable to use.

5” DA Pad – 5/16-24
for the IT-7311W5, IT-7445 and IT-7785. PSA – Has vinyl face for pressure sensitive adhesive abrasives.

Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only.

The IT-9915 series of grinders are built for production and long life. Adjustable exhaust, Heavy duty safety lockoff lever. Use type 27 wheels (not included).

The IT-9988HD is small, compact, lightweight and strong. This tool easily drills 1/2” holes in concrete. Comes with cushioned grip, side handle and 1/2” drill chuck.

The IT-7761 & IT-7761AH are reversible and produce accurate torque. The clutches are internally adjustable and feature rear exhaust.

IT-7788S2-A 3/8” Standard Jacobs Multicraft “S2” Drill Chuck. 3/8-24 threads. Key is model IT-7788S2-B. Chuck and key are model IT-7788S2-C. This chuck can be used on forward and reversible drills. Capacity 3/8”.

Manual torque adjustment – tighten or loosen internal spring

• Built-in regulator
• Long life twin hammer clutch
• Ring type socket retainer
• High performance motor
• Light weight aluminum handle
• Comfort grip
• Convenient forward and reverse

The IT-7445/IT-7446 have a smaller grip to better fit smaller hands. They both come with regulators and muffled exhaust.

IT-4120 Spring for IT-1X and IT-1XS

* Built-in regulator
* Ball bearing construction
* Lightweight aluminum housing
* Exhausts through handle
* Rugged 1 HP motor

Tapping Capacity-Aluminum: M3-M12
Tapping Capacity-Steel: M3-M8
Free Speed: 150 RPM
Length: 7.87″
Weight: 4.10 lbs.
Air Pressure: 90 PSI Max.

5″ Velcro Poly Pad 5/8-11 for IT-8818P

These pistol grip screwdrivers are light and comfortable. Rear Exhaust directs air away from the operator and muffles exhaust noise. Location of reverse lever makes changing directions easy.

Designed to be used in tight areas where only an angle can reach. Compact and easy to use, the angle head can be rotated 360 degrees.

The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip.

Tool comes standard with one head, either 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, M3, M4, M5, M6 or M8. Additional heads available separately.

The IT-7838D comes complete with air supply hose and exhaust hose. Also provided is our IT-783851 2-1/2” offset blade. This tool is a must for every glass shop and may be used with a wide range of blades.

IT-7788-KC 3/8″ Composite Keyless Drill Chuck. This chuck can be used on drills with forward and reverse. 3/8-24 thread Drill Chuck. Capacity 3/8”.

Plenty of power for the toughest jobs. Will drive pins, cut sheet metal, scrape or cut steel, aluminum, wood, stone or concrete. The IT-7151 has a longer stroke and heavier piston. The IT-7111 has a shorter stroke and piston and higher BPM making it more suitable for panel cutting.

*Teasing throttle
*Ball type socket retainer *Triple idler gear system *Light, easy to grip aluminum handle
*3/4 HP motor

This high torque ratchet handles those tough fasteners in tight places.

The IT-9407S is a 2 HP sander that comes complete with a T-7470A 7” rubber pad and pad nut. This is the same great tool as the IT-9407 grinder, but without a guard. IT-9407S has a governor to prevent over speeding as well as a heavy duty lock off lever to help prevent accidental starts.

7888P50V 3″ Velcro Pad 5/16-24