Compare products

Smooth, quiet and reliable, the IT-7786 & IT-7785 have a fast cutting action with the least amount of vibration possible. Exhaust is through the handle and blows toward the air hose, not on your work.

IT-7788HR-A 1/2” Standard Jacobs Multicraft Drill Chuck. 3/8-24 threads. Key is model IT-7788HR-B. Chuck and key are model IT-7788HR-C. This chuck can be used on forward and reversible drills. Capacity 1/2”.

Adapter has male thread 5/8-11.

The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks.

The IT-8816 is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with
a foam 7” Velcro Pad – (IT-881647V). Sanders come with blue grip and run at 5500 RPM. Polishers have a red grip and are 2500 RPM. The IT-8816 & IT-8816P have all the bells and whistles – Rear exhaust – lock off levers – cushion grips – foam pads – low noise – grease fitting in head.

These pistol grip screwdrivers are light and comfortable. Rear exhaust directs air away from the operator and muffles the exhaust noise. Location of reverse lever makes changing directions easy.

This lightweight, rugged 1.0 horsepower sander is excellent for shaping and contouring patches, sanding body filler
and for heavy rust removal. Comes complete with a rubber backup pad – (our IT-7470A).

The IT-7716P Same great tool as the IT-7716 but with a lower gear ratio. RPM is 2500, the perfect polishing speed. Comes complete with a rubber backup pad (our IT-7470A) and the IT-7472 Wool Polishing Pad.

IT-77887BASPA 1/4” Special Jacobs 7BA Drill Chuck. 3/8-24 threads. Key is model IT-77887BASPB. High quality machined gear. Chuck and key are model IT-77887BASPC. This chuck can be used on forward and reversible drills. Capacity 0 to 1/4”.

Sander Backup Pads for IT-7778.

The IT-9707 & IT-9709 are super duty grinders designed for production grinding in foundries, shipyards, fabrication shops and any application that requires a powerful, lightweight grinder.

IT-7788-A 3/8” Standard Jacobs Multicraft Drill Chuck. 3/8-24 threads. Key is model IT-7788-B. Chuck and key are model IT-7788-C. This chuck can be used on forward and reversible drills. Capacity 3/8″

•Heavy Duty 5/8” Drill
•Plenty of Power
•Side Handle
•Tapered Chuck
•Twin Hammer Clutch

•Quality hardened gears
•Rear Exhaust
•Variable Speed
•Forward and Reverse
•Angle head reaches into tight areas

Tool comes standard with one head, either 6-32, 8-32, 10-24, 10-32, 1/4-20, 5/16-18, M3, M4, M5, M6 or M8. Additional heads available separately.

The 1/4-28 Drill Motors shown here give a wide range of use for tight spots encountered in aircraft manufacturing and any type of production drilling situation.

7″ Rubber Pad

Same great tool as the IT-9916 but with a lower gear ratio. RPM is 2500, the perfect polishing speed. Comes complete with a plastic backup pad.

6” DA Pad – 5/16-24 for the IT-7311, IT-7446 and IT-7786. PSA – Has vinyl face for pressure sensitive adhesive abrasives.

Non-reversible, The IT-9888 is a quality 1/4” drill with the teasing throttle control you need. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4” Composite Keyless chuck as IT-9888K, with 1/4” Metal Keyless chuck as IT-9888MK and with 1/4” Hi-Precision Geared chuck as IT-9888SPC.

The IT-9988HD is small, compact, lightweight and strong. This tool easily drills 1/2” holes in concrete. Comes with cushioned grip, side handle and 1/2” drill chuck.

•Quality hardened gears
•Rear Exhaust
•Variable Speed
•Lightweight aluminum handle

The IT-9915 series of grinders are built for production and long life. Adjustable exhaust, Heavy duty safety lockoff lever. Use type 27 wheels (not included).

5/8”Drill Chuck with TAPERED MOUNT fits IT-9988HRS DRILL. Key is IT-9888HRS-B, Chuck and key is IT-9988HRS-C.

Small, lightweight and comfortable, the IT-7720N 3/8” Butterfly and the IT-9920 3/8” Butterfly Impacts are great for all types of assembly operations involving small fasteners. Excellent for transmission and body shops and all general mechanical work including production assembly. Both tools feature a 360 degree swivel regulator. Their compact size lets you reach the tightest areas.

Replacement 8″ pad for T-7777