Compare products

 
 
  Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x Remove x
Placeholder
Placeholder
IT-7763
IT-7888P
IT-9X
IT-7700SS
IT-7454HPR
IT-7788HR-A
IT-7788HR-KCN
IT-7749L
8818P11
IT-7121
IT-7768R
IT-7888P
IT-7888-A
Title 751138 2" PSA DA Pad 6mm IT-7716P 7" Angle Polisher IT-7763 1/4" Screwdriver IT-7888KC 1/4" Composite Keyless Chuck IT-9X Straight Handle Rivet Gun IT-7700SS Pistol Grip Scissor Shear IT-7718 7" Vertical Sander IT-7454HPR .75HP Heavy Duty 3/8" Reversible Drill IT-7788HR-A 1/2” Standard Jacobs Multicraft Drill Chuck IT-7788HR-KCN 1/2” Keyless Drill Chuck IT-7749L 2" Extended Anvil 8818P11 Adapter for T-8818P IT-9407S 7" Vertical Sander IT-7121 Super Duty .401 Air Hammer IT-9555 5" Super Duty DA Sander 3/16" Orbit IT-8825 1/4" Ratchet Wrench IT-7768R Super Duty 3/8" Reversible Drill IT-7718P 7" Vertical Polisher IT-7888A1B w/ 1/4" Jacobs 1B Chuck IT-8816 7" Angle Sander IT-7888-A 1/4" Drill Chuck Jacobs Multicraft
Price $8.04 $171.62 $149.73 $112.29 $442.34 $130.72 $164.71 $118.05 $18.98 $23.01 $253.41 $12.64 $650.85 $113.44 $205.03 $93.86 $149.73 $176.23 $139.94 $342.69 $10.92
Add to cart
Description

Spare pads for the IT-7211 & IT-7511.

The IT-7716P Same great tool as the IT-7716 but with a lower gear ratio. RPM is 2500, the perfect polishing speed. Comes complete with a rubber backup pad (our IT-7470A) and the IT-7472 Wool Polishing Pad.

These pistol grip screwdrivers are light and comfortable. Rear exhaust directs air away from the operator and muffles the exhaust noise. Location of reverse lever makes changing directions easy.

The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options.

Straight Handle Rivet Gun, .498 Shank Rivet Gun.

 

* Built-in regulator
* Ball bearing construction
* Lightweight aluminum housing
* Exhausts through handle
* Rugged 1 HP motor

*Teasing throttle
*Exhausts through bottom of handle
*Convenient forward and reverse lever
*Built to last

IT-7788HR-A 1/2” Standard Jacobs Multicraft Drill Chuck. 3/8-24 threads. Key is model IT-7788HR-B. Chuck and key are model IT-7788HR-C. This chuck can be used on forward and reversible drills. Capacity 1/2”.

IT-7788HR-KCN 1/2” Keyless Drill Chuck. Makes changing drill bits easy. This chuck can be used for for- ward and reversible drills. 3/8-24 threads. 1/2” capacity.

The IT-7749 has a steel clutch cover for use in demanding applications. A strong tool with 500 ft.lbs torque in forward and 600 ft.lbs. in reverse.

Adapter has male thread 5/8-11.

The IT-9407S is a 2 HP sander that comes complete with a T-7470A 7” rubber pad and pad nut. This is the same great tool as the IT-9407 grinder, but without a guard. IT-9407S has a governor to prevent over speeding as well as a heavy duty lock off lever to help prevent accidental starts.

The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks.

The IT-9555 & IT-9556 sanders are our smoothest running DA Sanders. Metal rotors and fiberglass pads help to improve cutting action and durability.

Ratchet wrenches are exceptionally good at doing the job they are designed for – removing fasteners after they have first been loosened. It is important to keep the ratchet mechanism clean and free of sand and grit. Sand will wear out the ratchet mechanism and cause premature tool failure. Use an air blow gun to clean the head after extended use.

Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only.

Same great tool as the IT-7718 but with a lower gear ratio. RPM is 2000, the perfect polishing speed. Comes complete with a rubber backup pad, our IT-7470A and the IT-7472 Wool Polishing Pad. A great tool for buffing and polishing paint, plastic, metal and wood.

The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip.

The IT-8816 is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with
a foam 7” Velcro Pad – (IT-881647V). Sanders come with blue grip and run at 5500 RPM. Polishers have a red grip and are 2500 RPM. The IT-8816 & IT-8816P have all the bells and whistles – Rear exhaust – lock off levers – cushion grips – foam pads – low noise – grease fitting in head.

IT-7888-A 1/4” Drill Chuck Jacobs Multicraft Standard Drill Chuck. 3/8-24 threads. Key is model IT-7788-B(fits IT-7888-A & IT-7788-A chucks). Chuck and key are model IT-7888-C. This chuck can be used on forward and reversible drills. Capacity 0 to 1/4”.

Sku - - - - - - - - - - - - - - - - - - - - -
Availability In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock In stock
Weight .5 lbs 5 lbs 2.7 lbs 2.5 lbs 5.5 lbs 3.4 lbs 5.5 lbs 3.3 lbs .5 lbs .5 lbs 6 lbs .5 lbs 8 lbs 4 lbs 2.5 lbs 1.3 lbs 3.7 lbs 5.5 lbs 2.5 lbs 5 lbs .5 lbs
Dimensions N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A
Price $8.04 $171.62 $149.73 $112.29 $442.34 $130.72 $164.71 $118.05 $18.98 $23.01 $253.41 $12.64 $650.85 $113.44 $205.03 $93.86 $149.73 $176.23 $139.94 $342.69 $10.92