Compare products

The IT-7888A is a small precision 1/4” drill with plenty of power that fits in the palm of your hand. Rubber grip reduces vibration and improves grip.

The IT-7445/IT-7446 have a smaller grip to better fit smaller hands. They both come with regulators and muffled exhaust.

Spare pads for the IT-7211 & IT-7511.

•Quality hardened gears
•Rear Exhaust
•Variable Speed
•Lightweight aluminum handle

The IT-9888R is a quality 1/4” drill with the same teasing throttle control as above and a convenient reversing lever. Multi directional exhaust cover channels exhaust away from user. Quiet and comfortable, the cushioned grip and quiet operation makes this the perfect 1/4” Palm Drill. Shown with precision 1/4” chuck. Also available with 1/4”Composite Keyless chuck as IT-9888RK and with 1/4” Hi-Precision Geared chuck as IT-9888RSPC.

*Teasing Throttle
*1/2 HP motor provides power through hardened planetary gear system
*Cutting head adjustable 360 degrees in 90 degree increments

•Quality hardened gears
•Rear Exhaust
•Variable Speed
•Lightweight aluminum handle

*Teasing throttle
*Exhausts through bottom of handle
*Convenient forward and reverse lever
*Built to last

IT-8859RS51 3″ Rolok Pad 5/16-24 Female

Spare pads for the IT-7211 & IT-7511.

The IT-7788R and IT-7788K are great for those tough jobs that need extra power. Excellent tool for honing, reaming, wire brushing, hole sawing, and heavy duty drilling. Plus they are reversing.

*Built in regulator
*Lightweight aluminum
*Lock off lever
*Rear exhaust
*IT-7002A44 Carbide Wheel included

Straight Handle Rivet Gun, .498 Shank Rivet Gun.

The IT-7768HR and IT-7768HRK have convenient forward and reverse lever, rear exhaust and all ball bearing construction.

The perfect tools for cleaning and polishing dies, porting and polishing engines, de-burring castings and any job where carbide burrs or stones are used for delicate material removal. The IT-7401 now comes in a storage case with oil bottle, quick disconnect fitting, IT-5830 oiler and 2 collet wrenches.

Quality drills for production use. The IT-7768R has a convenient forward and reverse lever, rear exhaust and all ball bearing construction. Comes standard with a quality drill chuck with a range of 0 to 3/8” and superior holding power. Variable speed and three gear system make this our best 3/8” drill. IT-7768 is the same great tool in forward only.

*Lightweight
*Marks on materials up to 64R in hardness
*Trouble free piston design
*Low air consumption
*Twist throttle

The IT-9940EXD is an exceptionally Heavy Duty 3/8” Angle Drill. Free Speed is 13,500, Spindle size is 3/8-24, Weight is 4 lbs., length is 12.5”. Forward direction only. Air cons. @ load- 26CFM

*.7 HP motor provides fast efficient grinding in tight spots
*Hardened spiral bevel gears in angle head for long life and low vibration
*Lock off lever standard
*Uses type 27 grinding wheels (not included)
*Built-in governor prevents overspeed

5” DA Pad – 5/16-24 for the IT-7311W5, IT-7445 and IT-7785. Has velcro face for abrasives with the hook and loop system.

IT-7788HR-KCN 1/2” Keyless Drill Chuck. Makes changing drill bits easy. This chuck can be used for for- ward and reversible drills. 3/8-24 threads. 1/2” capacity.

(uses our IT-9801341 4” Cutoff Wheel) same great tool as the IT-8801REX, but with short reach

The T-7121 is a Super Duty Air Hammer that produces up to 3000 blows per minute at 90 PSI. Excellent for cutting, crimping, driving pins, bushings, shearing and for front end work. Long life cylinder with hardened and ground piston. Metal valve blocks.

The IT-7788R and IT-7788K are great for those tough jobs that need extra power. Excellent tool for honing, reaming, wire brushing, hole sawing, and heavy duty drilling. Plus they are reversing.

Designed to be used in tight areas where only an angle can reach. Compact and easy to use, the angle head can be rotated 360 degrees.

The IT-8758R and IT-8759R are the .35 HP version of the IT-8859R. With plenty of power and their smaller size, these tools are a must for production grinding. As with all die grinders, use of balanced stones and accessories are required. Also using a maximum of 90 PSI at the tool and oiling daily at the end of each shift will give extended life to the tool.

Sander Backup Pads for IT-7778.

Straight Handle Rivet Gun, .401 Shank Rivet Gun.

Make distortion free cuts with the IT-7700N and IT-7701. The blades shear the material giving a clean cut. A 1/4” strip of material is removed by the cutting action or can be used to trim one edge. Loosen one screw to rotate head 360 degrees.

Spare pads for the IT-7211 & IT-7511.

The IT-5540 precision 3/8” non reversing drill features smooth two speed throttle, strong .7 HP motor, side handle for right or left hand use, quiet rear exhaust and roller bearings in the gears. Choose from three drill chuck options.

Spare pads for the IT-7211 & IT-7511.

The IT-8816 is excellent for shaping and contouring patches, sanding body filler and for heavy rust removal. Comes complete with
a foam 7” Velcro Pad – (IT-881647V). Sanders come with blue grip and run at 5500 RPM. Polishers have a red grip and are 2500 RPM. The IT-8816 & IT-8816P have all the bells and whistles – Rear exhaust – lock off levers – cushion grips – foam pads – low noise – grease fitting in head.

IT-8859RS50 Pad Adapter 1/4-20 x 5/16-24

7″ PSA Pad

Both tools are lightweight, powerful production routers. Easily adjustable. Direct drive motors have no gears to wear. Complete with lock off levers and rear exhaust. All aluminum router base.

A must for every glass shop. Cuts incapsulated glass with ease. Also works great for cutting material out of expansion joints. Sharp blades and cutting action of this tool make for an excellent caulking and putty scraper – even cuts wood. Double head bearings for trouble free service.

The IT-7888 is a small precision 1/4” drill with plenty of power. Fits in the palm of your hand. Choose from four chuck options.

The IT-5T Sand Rammer is a hard hitting Heavy Duty Rammer built for production use in foundries, construction sites, utility companies or wherever a Rammer is used.

Powerful, lightweight and easy to use, the IT-9969G grinder makes quick work of grinding steel, aluminum, composites and wood. Built-in regulator for precise speed control. Hardened cylinder and end plates. Rear exhaust. 105 degree angle head. Uses type 27 wheel (included).